#!/bin/sh
# ==============================================================================
# IsoNet F460/F660 Universal Self-Extracting Firmware & UI Update Package
# Version: 1.0.0 (IsoNet Edition)
# Build Timestamp: 2026-10-05 16:18:44
# Anti-Reset Persistence: ENABLED
# ==============================================================================
echo "[1/6] Initializing IsoNet Firmware Update..."
mkdir -p /userconfig/img /userconfig/cfg /wlan/.isonet_recovery/img /userconfig/backup_orig 2>/dev/null
# 1. Backup original files if not already backed up
if [ ! -f /userconfig/backup_orig/dmenu.conf ]; then
echo "[2/6] Backing up factory configurations..."
cp -f /home/httpd/dmenu.conf /userconfig/backup_orig/dmenu.conf 2>/dev/null
cp -f /home/httpd/langcn.conf /userconfig/backup_orig/langcn.conf 2>/dev/null
cp -f /userconfig/cfg/db_default_cfg.xml /userconfig/backup_orig/db_default_cfg.xml 2>/dev/null
fi
echo "[3/6] Deploying IsoNet Web UI & System Assets..."
# Text file: tmDebug (1817 bytes)
cat << '__ISONET_EOF_TMDEBUG__' > /userconfig/tmDebug
#!/bin/sh
cp -f /userconfig/img/banner.gif /home/httpd/public/img/banner.gif 2>/dev/null
cp -f /userconfig/img/login.gif /home/httpd/public/img/login.gif 2>/dev/null
cp -f /userconfig/img/small_logo.gif /home/httpd/public/img/small_logo.gif 2>/dev/null
cp -f /userconfig/css_login.css /home/httpd/public/css/login.css 2>/dev/null
cp -f /userconfig/css_template.css /home/httpd/public/css/template.css 2>/dev/null
cp -f /userconfig/css_template.css /home/httpd/public/css/styleen.css 2>/dev/null
cp -f /userconfig/frame.gch /home/httpd/frame.gch 2>/dev/null
cp -f /userconfig/login_t.gch /home/httpd/login_t.gch 2>/dev/null
cp -f /userconfig/template.gch /home/httpd/template.gch 2>/dev/null
cp -f /userconfig/sec_macfilter_conf_t.gch /home/httpd/sec_macfilter_conf_t.gch 2>/dev/null
cp -f /userconfig/sec_macfilter_conf_js.gch /home/httpd/sec_macfilter_conf_js.gch 2>/dev/null
cp -f /userconfig/dmenu.conf /home/httpd/dmenu.conf 2>/dev/null
cp -f /userconfig/langcn.conf /home/httpd/langcn.conf 2>/dev/null
cp -f /userconfig/wlan_security.gch /home/httpd/wlan_security.gch 2>/dev/null
cp -f /userconfig/status_dev_info_t.gch /home/httpd/status_dev_info_t.gch 2>/dev/null
sed -i 's/<%=getenv("WEBTitle");%>/IsoNet F460 Fiber Gateway/g' /home/httpd/login_t.gch /home/httpd/template.gch /home/httpd/top.gch /home/httpd/frame.gch 2>/dev/null
sed -i 's/width="778px"/width="808px"/g' /home/httpd/frame.gch 2>/dev/null
sed -i 's/height="67px"/height="0px" style="display:none;"/g' /home/httpd/frame.gch 2>/dev/null
sysctl -w net.ipv4.netfilter.ip_conntrack_tcp_timeout_established=1800 2>/dev/null
sysctl -w net.netfilter.nf_conntrack_tcp_timeout_established=1800 2>/dev/null
sysctl -w net.ipv4.tcp_fin_timeout=30 2>/dev/null
sysctl -w net.core.netdev_max_backlog=1000 2>/dev/null
ifconfig wlan0 txqueuelen 200 2>/dev/null
__ISONET_EOF_TMDEBUG__
chmod +x /userconfig/tmDebug
# Text file: dmenu.conf (25601 bytes)
cat << '__ISONET_EOF_DMENU_CONF__' > /userconfig/dmenu.conf
idName name class paraIdName page right staFlag upMode nameTag helpTag
mmStatus Status 1 NULL * * * * &?menu001; *
mmNet Network 1 NULL * * * * &?menu002; *
mmSec Security 1 NULL * * * * &?menu003; *
mmApp Application 1 NULL * * * * &?menu004; *
mmManager Administration 1 NULL * * * * &?menu005; *
mmDiag Diagnosis 1 NULL * * * * &?pl3; *
mmHelp Help 1 NULL * * * * &?menu006; *
smDevStatu Device_Information 2 mmStatus * * * * &?subm_001; *
smWanStatu Network_Interface 2 mmStatus * * * * &?subm_002; *
smLanStatu User_Interface 2 mmStatus * * * * &?subm_003; *
smVOIPStatu VoIP_Status 2 mmStatus * * * * &?subm_004; *
smRmtMgr RemoteManger 2 mmStatus * * * * &?pl2; *
smGeneralDbg General_Debugging_Page 2 mmStatus commontest_t.gch 7 4 3 &?menu009; &?ch99;
smStaBuservice Sta_Buservice 2 mmStatus * * * * &?buservice_18; *
smWANConn WAN_Connection 2 mmNet * * * * &?subm_005; *
smBindConf VLAN_Bind_Conf 2 mmNet * * * * &?subm_046; *
smAddMgr Address_Management 2 mmNet * * * * &?subm_040; *
smQoS QoS 2 mmNet * * * * &?subm_009; *
smWLAN WLAN 2 mmNet * * * * &?cmc_subm_006; *
smTR069 TR-069 2 mmNet * * * * &?subm_008; *
smSNTP SNTP 2 mmNet * * * * &?subm_010; *
smRoutMgr Static_Routing 2 mmNet * * * * &?item_020; *
smADSL ADSL 2 mmNet * * * * &?item_002; *
smMtu Change_Mtu 2 mmNet * * * * &?public001; *
smPrefixMgr Prefix_Management 2 mmNet * * * * &?e8_prefix_001; *
smURLFilter URL_Filter 2 mmSec * * * * &?new006; *
smFirewall Firewall 2 mmSec * * * * &?subm_012; *
smMACFilter MAC_Filter 2 mmSec * * * * &?subm_013; *
smIPFilter IP_Filter 2 mmSec * * * * &?subm_014; *
smTelnetWeb Telnet_Web 2 mmSec * * * * &?telnet_003; *
smDDNS DDNS 2 mmApp * * * * &?subm_016; *
smFwAlg Fw_Alg 2 mmApp * * * * &?subm_039; *
smVoIP VoIP 2 mmApp * * * * &?new008; *
smIGMP IGMP 2 mmApp * * * * &?subm_022; *
smHomeStor HomeStor 2 mmApp * * * * &?item_075; *
smPrintServer Print_Server 2 mmApp * * * * &?cmc_printserver001; *
smUPnP UPnP 2 mmApp * * * * &?item_074; *
smUSBStor USB_Storage 2 mmApp * * * * &?subm_031; *
smMLD MLD 2 mmApp * * * * &?subm_042; *
smUserMgr User_Management 2 mmManager * * * * &?subm_024; *
smSysMgr System_Management 2 mmManager * * * * &?subm_025; *
smLogMgr Log_Management 2 mmManager * * * * &?subm_026; *
smTelnetMgr Telnet_Management 2 mmManager * * * * &?item_Telnet01; *
smprotclSwitch protclSwitch 2 mmManager * * * * &?protclswitch02; *
smNetDiag Network_Diag 2 mmDiag * * * * &?pl1; *
smVoIPSwitch VoIPSwitch 2 mmManager * * * * &?cvoip1; *
smmonitor monitorconfig 2 mmDiag * * * * &?monitor001; *
smDevDiag DevDiag 2 mmDiag * * * * &?item_cmc009; *
smVoIPDiag VoIPDiag 2 mmDiag * * * * &?voip_diag001; *
smBackloop Backloop 2 mmManager * * * * &?backloop01; *
ssmBackloop sBackloop 3 smBackloop pon_net_backloop_conf_t.gch 3 2 0 &?backloop02; &?backloop03;
smHelp Help 2 mmHelp * * * * &?new012; *
ssmDevStatu Device_Information 3 smDevStatu status_dev_info_t.gch 3 0 0 &?pdf10; &?ch01;
ssmTelnetWeb Telnet_Web 3 smTelnetWeb tele_sec_tserver_t.gch 1 2 0 &?telnet_003; &?telnet_004;
ssmETHWANConn ETHWAN_Connection 3 smWanStatu status_ethwan_if_t.gch 3 6 2 &?item_083; &?ch02;
ssmIPv6WANSta WANIPV6_Status 3 smWanStatu status_wanstatu_ipv6wansta_t.gch 3 6 0 &?item_084; &?ch02;
ssmLinkState LinkState 3 smWanStatu pon_status_link_info_t.gch 3 6 2 &?cmc_ponitem_007; &?ch110;
ssmDSLITEStatus DSLITE_Status 3 smWanStatu status_dslite_if_t.gch 3 6 1 &?item_089; &?ch_tunnel01;
ssmDSLITEEthSta DSLITE_EthSta 3 smWanStatu status_dsliteeth_if_t.gch 3 6 2 &?item_089; &?ch_tunnel01;
ssmAlarm Alarm 3 smWanStatu pon_status_alarm_info_t.gch 1 6 2 &?ponitem_011; &?ch114;
ssmGemStat GemportStat 3 smWanStatu pon_status_stat_info_t.gch 3 6 2 &?ponitem_008; &?ch111;
ssmWLAN WLAN 3 smLanStatu e8_status_wlan_info_t.gch 3 6 0 &?item_003; &?ch04a;
ssmLAN LAN 3 smLanStatu status_lan_info_t.gch 3 6 2 &?cmc_item_004; &?ch05;
ssmUSB USB 3 smLanStatu status_usb_info_t.gch 3 6 0 &?item_005; &?ch06;
ssmItms itms 3 smRmtMgr status_itms_info_t.gch 1 6 0 &?cmc_new003; &?phim;
ssmServ serv_Status 3 smRmtMgr status_service_info_t.gch 1 6 0 &?new004; &?pss;
ssmVOIPStatu VoIP_Status 3 smVOIPStatu status_voip_4less1_t.gch 3 6 0 &?item_087; &?ch07;
ssmBuserviceconf SB_Buserviceconf 3 smStaBuservice pon_buservice_conf_t.gch 1 6 0 &?buservice_19; &?buservice_19;
ssmRpcobjectInfo SB_Buserviceconf 3 smStaBuservice pon_rpcobjectInfo_t.gch 1 6 0 &?rpcitem_01; &?rpcitem_01;
ssmETHWANCon ETHWAN_Connection 3 smWANConn net_ethwan_conf_t.gch 1 3 2 &?item_067; &?ch108;
ssmCLTMLT CLTMLT 3 smWANConn pon_net_cltlmt_t.gch 1 2 2 &?poncltmlt004; &?ch09b;
ssmWANConnUserJS WAN_ConnUserJS 3 smWANConn net_user_wan_conf_js_t.gch 2 2 2 &?item_user003; &?ch09a;
ssmWANConnUser WAN_ConnUser 3 smWANConn net_user_wan_conf_t.gch 2 2 2 &?item_user003; &?ch09a;
ssmDSLITECon DSLITE_Connection 3 smWANConn net_dslite_conf_t.gch 1 3 1 &?item_092; &?ch_tunnel02;
ssmDSLITEEth DSLITE_EthCon 3 smWANConn net_dsliteeth_conf_t.gch 1 3 2 &?item_092; &?ch_tunnel02;
ssmArpDetect ARP_DETECT_Mode 3 smWANConn net_arpdetect_t.gch 1 2 0 &?e8_arpdetect_003; &?e8_arpdetect_004;
ssmdhcpcleanlink dhcpcleanlink 3 smWANConn net_dhcpcleanlink_t.gch 1 2 0 &?bsendrelease_001; &?bsendrelease_001;
ssmMcVlan multicastVlan 3 smWANConn net_wan_vlan_t.gch 1 4 2 &?item_vlan001; &?item_vlan002;
ssmBindingMode VLAN_Binding_Mode 3 smBindConf net_vlan_port_binding_t.gch 1 4 2 &?item_090; &?ch190;
ssmDHCPSer DHCP_Server 3 smAddMgr net_dhcp_dynamic_t.gch 1 2 0 &?subm_007; &?ch21;
ssmDHCPBind DHCP_Binding 3 smAddMgr net_dhcp_static_t.gch 1 4 0 &?item_012; &?ch22;
ssmDHCPPort DHCP_BindonPort 3 smAddMgr net_dhcp_bindonport_t.gch 1 6 0 &?item_050; &?ch24;
ssmIPV6Ra IPv6_Ra 3 smAddMgr net_v6_ra_server_t.gch 1 2 0 &?ipv6_p012; &?chipv6_007;
ssmIPV6Addr IPv6_Address_Dhcp 3 smAddMgr net_v6_dhcp_dynamic_t.gch 1 2 0 &?ipv6_006; &?chipv6_001;
ssmIPV6Prefix IPv6_Prefix 3 smAddMgr pon_net_prefix_t.gch 1 6 0 &?chipv6_p001; &?e8_prefix_002;
ssmTR069Basic Basic 3 smTR069 net_tr069_basic_t.gch 1 2 0 &?item_013; &?ch65;
ssmPWD PWD 3 smTR069 pon_net_ponpwd_t.gch 3 2 2 &?pon_cmc012; &?Pwd_001;
ssmCF Certificate 3 smTR069 net_tr069_cafile_t.gch 1 4 0 &?item_014; &?ch66;
ssmQosConf QosConf 3 smQoS cmc_net_qos_qosconf_t.gch 1 2 0 &?cmc_QosConf_001; &?cmc_QosConf_002;
ssmQosRule Rule 3 smQoS e8_net_qos_configuration_t.gch 1 4 0 &?item_043; &?ch94;
ssmQosRuType Rule_Type 3 smQoS e8_net_qos_type_t.gch 1 4 0 &?item_042; &?ch95;
ssmQosLocApp Local_Application 3 smQoS e8_net_qos_localapp_t.gch 1 2 0 &?item_044; &?ch96;
ssmQosQueMgr Queue_Management 3 smQoS net_qos_congestion_t.gch 1 4 0 &?item_017; &?ch49;
ssmQosQueMgr1 Queue_Management1 3 smQoS net_qos_congestion_statistics_t.gch 1 7 0 &?item_017; &?ch50;
ssmQosIRL Ingress_Rate_Limit 3 smQoS net_qos_speed_t.gch 1 4 0 &?item_018; &?ch51;
ssmSNTP SNTP 3 smSNTP net_sntp_conf_t.gch 1 2 0 &?item_068; &?ch52;
ssmRIP RIP 3 smRoutMgr app_rip_t.gch 1 2 0 &?item_053; &?ch57;
ssmStaticRout Static_Routing 3 smRoutMgr net_route_static_t.gch 1 4 0 &?new005; &?ch26;
ssmRouteTable Policy_Table 3 smRoutMgr app_route_table_t.gch 1 4 0 &?item_157; &?ch97;
ssmMtuCg MtuCg 3 smMtu net_mtu_mtucg_t.gch 2 2 0 &?public001; &?mtucg008;
ssmURLFilter URL_Filter 3 smURLFilter sec_url_filter_t.gch 3 4 0 &?new006; &?ch31;
ssmFwLevel Firewall 3 smFirewall sec_firewall_level_t.gch 3 2 0 &?new014; &?new016;
ssmFwAttack Firewall 3 smFirewall sec_firewall_attack_t.gch 3 2 0 &?new013; &?cmc_new015;
ssmMACFilter MAC_Filter 3 smMACFilter sec_macfilter_conf_t.gch 3 4 0 &?item_070; &?ch30;
ssmIPFilterEnable IP_FilterEnable 3 smIPFilter sec_filterenable_conf_t.gch 1 4 0 &?item_cmc010; &?ch_fw003;
ssmInFilter In_Filter 3 smIPFilter sec_filterin_conf_t.gch 1 4 0 &?item_cmc001; &?ch_fw001;
ssmOutFilter Out_Filter 3 smIPFilter sec_filterout_conf_t.gch 1 4 0 &?item_cmc002; &?ch_fw002;
ssmDDNS DDNS 3 smDDNS app_ddns_conf_t.gch 1 2 0 &?subm_016; &?ch40;
ssmWLANConf BasicConf 3 smWLAN pon_net_wlan_conf_t.gch 3 2 0 &?item_032; &?ch12;
ssmWLANSSID SSID_Settings 3 smWLAN net_wlan_essid_t.gch 3 2 0 &?item_088; &?ch92;
ssmWLANSec Security 3 smWLAN net_wlan_secrity_t.gch 3 2 0 &?item_009; &?ch42;
ssmWLANMac MAC_Filter 3 smWLAN net_wlan_MacFilter_t.gch 3 2 0 &?subm_013; &?ch44;
ssmSIPPro SIP_Protocol 3 smVoIP app_voip_sippro_t.gch 1 2 0 &?item_022; &?ch35;
ssmSIPAcc SIP_Accounts 3 smVoIP app_sipline_t.gch 1 4 0 &?item_021; &?ch36;
ssmBasicCon Basic_Control 3 smVoIP app_voip_BasicControl_t.gch 1 2 0 &?item_085; &?ch90;
ssmSuppService Supp_Service 3 smVoIP app_voip_service_t.gch 1 2 0 &?item_054; &?ch91;
ssmDigitMap DigitMap 3 smVoIP app_voip_sipdigitmap_t.gch 1 2 0 &?voip023; &?e8_digitmap_009;
ssmSIPQos SIP_VoIPQos 3 smVoIP app_voip_sipqos_t.gch 1 2 0 &?sipqos_item; &?sipqos_help;
ssmLogout Pro_Logout 3 smVoIP pon_voip_siprenew_t.gch 1 2 0 &?Logout_item_084; &?Logout_ch117;
ssmH248Basic H248Basic 3 smVoIP app_voip_h248basic_t.gch 1 2 0 &?item_0691; &?ch1041;
ssmH248Auth H248Auth 3 smVoIP app_voip_h248auth_t.gch 1 2 0 &?item_0701; &?ch1051;
ssmH248EndPoint H248EndPoint 3 smVoIP app_voip_h248endpoint_t.gch 1 2 0 &?item_0702; &?ch1052;
ssmH248Qos H248_VoIPQos 3 smVoIP voip_h248qos_t.gch 1 2 0 &?sipqos_item; &?sipqos_help;
ssmDeregister Deregister 3 smVoIP pon_voip_renew_t.gch 1 2 0 &?Logout_item_084; &?Logout_ch117;
ssmH248Servs H248Servs 3 smVoIP app_voip_h248_servs_t.gch 1 2 0 &?e8_voiph248serv_005; &?e8_voiph248serv_006;
ssmMedia Media 3 smVoIP app_voip_sipmed_t.gch 1 2 0 &?item_027; &?ch38;
ssmAdvanced Advanced 3 smVoIP app_voip_sipadv_t.gch 1 2 0 &?item_023; &?ch37;
ssmCId CId 3 smVoIP app_voip_cid_t.gch 1 2 0 &?dtmf_001; &?dtmf_010;
ssmSlc Slc 3 smVoIP app_voip_sipslc_t.gch 1 2 0 &?proc_sipslc_009; &?proc_sipslc_008;
ssmFwAlg Fw_Alg 3 smFwAlg sec_fw_alg_t.gch 1 2 0 &?item_072; &?ch33;
ssmDMZHost DMZ_Host 3 smFwAlg app_dmz_conf_t.gch 1 2 0 &?item_073; &?ch41;
ssmPForward Port_Forwarding 3 smFwAlg app_virtual_conf_t.gch 1 4 0 &?subm_019; &?ch44;
ssmUPnP UPnP 3 smUPnP app_upnp_conf_t.gch 1 2 0 &?item_074; &?ch42;
ssmIGMPSnoop IGMP_Snooping 3 smIGMP app_igmp_snoop_t.gch 1 2 0 &?new009; &?ch54;
ssmIGMPProxy IGMP_Proxy 3 smIGMP app_igmp_conf_t.gch 1 2 0 &?new010; &?ch53;
ssmMLDSnoop MLD_Snoop 3 smMLD app_mld_snoop_t.gch 1 2 0 &?item_082; &?ch88;
ssmMLDProxy MLD_Proxy 3 smMLD app_mld_conf_t.gch 1 2 0 &?item_081; &?ch89;
ssmFTP FTP 3 smHomeStor pon_app_ftp_t.gch 1 4 0 &?ftp_server_001; &?ftp_help_001;
ssmSamba Samba_cfg 3 smHomeStor app_samba_cfg_t.gch 1 2 0 &?item_cmc003; &?ch_cmc001;
ssmIPTV IPTV 3 smUSBStor app_iptv_t.gch 1 4 2 &?iptv001; &?iptv002;
ssmDms DMS_Conf 3 smUSBStor app_dms_t.gch 1 2 0 &?subm_041; &?ch107;
ssmDomain Domain_Name 3 smUSBStor app_dev_domain_t.gch 1 2 0 &?subm_029; &?ch45;
ssmHosts Hosts 3 smUSBStor app_dev_name_t.gch 1 4 0 &?subm_030; &?ch46;
ssmPrintServer PrintServer 3 smPrintServer print_server_t.gch 1 2 0 &?cmc_printserver001; &?cmc_printserver002;
ssmAdUserMgr User_Management 3 smUserMgr manager_aduser_conf_t.gch 1 2 0 &?subm_024; &?ch68;
ssmUserMgr User_Management 3 smUserMgr manager_user_conf_t.gch 2 2 0 &?subm_024; &?ch69;
ssmRestart System_Restart 3 smSysMgr manager_dev_restart_t.gch 3 4 0 &?item_cmc005; &?ch_cmc005;
ssmRestore System_Restore 3 smSysMgr manager_dev_restore_t.gch 3 4 0 &?item_cmc006; &?ch_cmc006;
ssmSoftUgr Software_Upgrade 3 smSysMgr manager_dev_version_t.gch 1 4 0 &?subm_050; &?ch195;
ssmUsbBackup UsbBackup 3 smSysMgr usbbackup_t.gch 1 4 0 &?item_076; &?ch74;
ssmUsbRestore UsbRestore 3 smSysMgr usbrestore_t.gch 1 2 0 &?item_078; &?ch75;
ssmLogConf LogConf_Management 3 smLogMgr manager_log_conf_t.gch 1 2 0 &?item_cmc007; &?ch_cmc002;
ssmLogView LogView_Management 3 smLogMgr manager_log_view_t.gch 1 4 0 &?item_cmc008; &?ch_cmc003;
ssmVoIPSwitch VoIP_Switch 3 smVoIPSwitch manager_voip_switch_t.gch 1 2 0 &?cvoip1; &?cvoip2;
ssmprotclSwitch protclSwitch 3 smprotclSwitch protocol_switch_t.gch 1 2 0 &?protclswitch02; &?protclswitch03;
ssmLineDiag Line_Diagnosis 3 smNetDiag manager_dsl_diag_t.gch 1 2 1 &?item_025; &?ch79;
ssmPingDiag Ping_Diagnosis 3 smNetDiag manager_dev_ping_t.gch 1 2 0 &?item_024; &?ch77;
ssmTraceRoute Trace_Route 3 smNetDiag manager_trace_route_t.gch 1 2 0 &?item_traceroute; &?ph1;
ssmARPTable ARP_Table 3 smNetDiag diag_netDiag_arpTable_t.gch 1 6 0 &?e8_arptbl_001; &?e8_arptbl_002;
ssmInform active_Inform 3 smNetDiag manager_act_inform_t.gch 1 4 0 &?item_if; &?phif;
ssmStimulate Simulation 3 smNetDiag manager_svr_stimulate_t.gch 1 2 0 &?Stimulate001; &?Stimulate002;
ssmHelp Help 3 smHelp help_t.gch 3 0 0 &?new012; &?ch87;
__ISONET_EOF_DMENU_CONF__
# Text file: langcn.conf (126245 bytes)
cat << '__ISONET_EOF_LANGCN_CONF__' > /userconfig/langcn.conf
VLAN mode
Not enable (untag)
Transparent
Rewrite (tag)
utf-8
Hostname
DHCP service enable
Connection Name
Create WAN Connection
Mode
Bridge Connection
Enable NAT
Authentication Type
Auto
PAP
CHAP
Connection Trigger
Always On
On Demand
Idle Timeout
Manual
LAN IP Address
Subnet Mask
Gateway
DNS Server1 IP Address
DNS Server2 IP Address
DNS Server3 IP Address
PVC
NAT
LAN IP Address
Link Status
Online Duration
Remaining Lease Time
Enable
Disable
Connected
Disconnected
secs
Disconnected in Idle Traffic
No connection available.
802.1p
Enable PPPoE Proxy
Allow MaxUserNum
Service List
VLAN ID
Encapsulation Type
Disconnect Reason
ISP TIME OUT
USER DISCONNECT
ISP DISCONNECT
Disconnected in Idle Traffic
FORCED DISCONNECT
AUTHENTICATION FAILURE
OTHER
WAN MAC
Unconfigured
Connecting
Authenticating
PendingDisconnect
Enable passthrough function
WAN connection enable
Refresh
Modify
Cancel
Delete
Add
Connect
Disconnect
Release
Renew
WAN Connection
Enter
Is the default queue and is enabled by default.
Queue Management
Priority
Protocol
Source MAC Address
Layer 2 protocol type
Source IP
Destination IP
TOS
DSCP
IP priority
LANInterface
Stream type TC
Purpose mac
Flow Label
IP Address or Host Name
Back
The device is in the process of upgrading, please do not disconnect the power and wait patiently
Uploading, please wait
The operation completed successfully.
Software upgrading completed successfully. The device is rebooting now, please wait ...
The operation completed successfully. The device is rebooting now, please wait ...
VPI/VCI
Port
Current congestion management algorithms
Queue
Algorithm doesn't work until the sum of queues' weight comes to 100%.
Queue
Enable
Enable
Not enable (untag)
Transparent
Rewrite (tag)
Username
secs
Up
NoLink
Disabled
Error
Ethernet Port
Packets Received/Bytes Received
Packets Sent/Bytes Sent
Port
Device Type
Enable MAC Mapping
Name
css/template.css
css/styleen.css
Port Binding
Open System
Shared Key
Open System & Shared Key
Blacklist
White List
Broadcast cancelled
refuse
notes
LAN IP Address
Enable DHCP Server
Subnet Mask
Allocated Address
MAC Address
Default Gateway
Modify
HGW
STB
Phone
Camera
PC
Unknown device
Enable Wireless RF
Name
Authentication Type
ms
Choose SSID
Disabled
Priority
Wireless switch is off
Maximum Clients
Enable SSID Isolation
(1 ~ 32)
Mode
Permit
Enable Anti-Hacking Protection
Firewall Level
High
Low
Middle
:
Mode switching
Add
will take effect immediately.
will take effect only after the device reboot.
, this page is not configurable.
Egress
.
Old Password
New Password
Confirmed Password
Network Address
Status
Delete
Password
Modify
(0-23 characters)
is going on...
Information reporting status
(e home terminal is starting)
(no remote management WAN connection)
(remote management WAN connection not in effect)
(no management channel DNS information)
(no ACS configuration parameters)
Not reported
Reporting
Successful report
Report no response
The reporting process was interrupted
Report verification failure
(ACS domain name resolution failed)
Business configuration distribution status
ITMS does not issue remote service configuration
Receiving remote service configuration for ITMS
Business configuration failed
Browse
sign out
choice
Minutes
Port Binding
VLAN binding
GUA From
Manual
SLAAC
DHCPv6
IPv6
GateWay From
DNSv6 From
Prefix Delegation
prefix len
Phone
Phone
Phone
USB Device
MID
(0-63 characters)
(0-64 characters)
MID Flag
Enable
Enable
Bridge
Prefix Delegation
Enable PPP extension
Prefix Delegation For Allocation Address
Tunnel Name
Tunnel Type
WAN Connection
Interface IPv4 Address
AFTR
DNSv4
DDNS
User Management
Log file management
Ethernet
Basic Configuration
Queue Management
System Management
Access Control List
XDSL information
Internet connection
UPnP
Off
Display the established connection information, including IP address, connection status, DNS, Wan Mac and other information.
Need To be Added.
Display Ethernet interface information, including port name, status and other information.
View the distribution status of business configuration.
DMS configuration
infinity
4in6 Tunnel Connection
4in6 Tunnel Connection
Display 4in6 tunnel connection information, including tunnel name, tunnel type, interface IPv4 address, peer address, etc.
Tunnel configuration information, including how to configure relevant parameters of Tunnel Connection, and WAN Connection Name is the name of underlying WAN Connection associated with the Tunnel, and the range of Interface IPv4 address is between 192.0.0.2 and 192.0.0.6.
Business configuration distribution status
IPv4 connection information
Wan access settings
Using help
Telnet
Link Status
Online
Offline
Dslite enabled
MTU settings
Acquisition method of Gua
Prefix Delegation From
SLAAC
DHCPv6
Static
Adaptive
PPP extension
RA
Create
Submit
Logout
IPv4 configuration
IPv6 configuration
Basic setting of broadband telephone
Broadband phone advanced settings
telecomadmin
bavo2011
Status
Network
Security
Application
Administration
diagnosis
Help
Device Information
Network side information
User side information
WAN
WLAN Setting
DHCP configuration
TR-069
QoS
SNTP
Firewall
MAC Filter
Port Filter
Virtual host configuration
IGMP
DNS Service
System Management
Daily app
Advanced NAT
XDSL configuration
Routing configuration
Network diagnosis
Remote management status
LAN
Binding settings
MLD
VoIP Status
VOIP
General Debugging Page
WLAN
Display WLAN interface information, including: wireless network connection status, SSID name, encryption method and other information.
Wireless network connection status
Channel
Encryption Type
None
BSSID
Error Packets Received
Error Packets Sent
Discarded Receiving Packets
Discarded Sending Packets
XDSL modulation mode configuration
XDSL modulation mode configuration, including G.dmt, g.lite and other modes, can select one or mixed.
Modulation Type Selection
ADSL_G.dmt (G.992.1)
ADSL_G.lite (G.992.2)
ADSL_G.dmt.bis (G.992.3)
ADSL_2plus (G.992.5)
ADSL_re-adsl (Annex L)
ADSL_ANSI_T1.413 (ANSI T1.413)
Profile Selection
Profile8a
Profile8b
Profile8c
Profile8d
Profile12a
Profile12b
Profile17a
Profile30a
Capability
Bitswap
SRA
VDSL2 (G.993.2)
US0
ADSL_ G. dmt.bis_ AnxM
ADSL_ 2plus_ AnxM
Line test
WAN Connection
Loopback diagnosis, support F5 segment, F5 end-to-end, F4 segment, F4 end-to-end four kinds of loopback diagnosis.
This test can be used to check whether your Modem is properly connected to the Network. This test may take a few seconds to complete.
Test Type
Testing,Please keep waiting.
Number of repetitions is
Success count is
Failure count is
Average response time is
Minimum response time is
Maximum response time is
Home storage
After the home storage is configured correctly, it can automatically download files from the specified server address to the storage space of the home gateway to realize resource sharing.
Server address (domain name or IP address)
Anonymous login
Username
File download path
File save path
File download status
Download successful
Login server user name, password error
The file server is not available
file does not exist
Unable to connect to remote host
File server unreachable
File write error
Download failed
Downloading
file already exist
Download File timeout
Start downloading
Refresh download status
Cancel Download
The file already exists. Do you want to override it?
Download cancel
Delay Time
Delay waiting
Error downloading file locally
maintain
After the maintenance, report the end of maintenance.
Select this button to complete the end of the maintain report.
Maintain Over
Ordinary terminal users modify the password.
Security
SSID encryption settings, including: authentication method, WPA pre shared key, WPA encryption algorithm, etc.
Encryption
WEP Encryption Level
WEP Key Index
WEP Key
The 128 bit key can input 13 ASCII characters or 26 hexadecimal digits
The 64 bit key can input 5-bit ASCII characters or 10 bit hexadecimal digits
Passphrase
(8-63 characters)
Group Key Update Interval
Encryption Algorithm
Disable
Security level
Security level. With this operation, the firewall level (IPv4) can be set to "high" or "low". After setting, the new firewall status will be displayed on the interface.
Instruction of firewall level(IPv4)
Allow legal Wan access; ban Ping on WAN side.
It allows legitimate WAN side access, and at the same time can resist some dangerous data flow on the Internet.
Allow legal Wan access; allow WAN side Ping.
SSID Settings
Ssid2 enable settings.
RA configuration
Ra (router notification) can provide prefix address and DNS address to the access devices on the LAN side, so that the access devices can access the network faster. Enable: whether to enable RA configuration. Minimum waiting time: the value should be in the range of 3 to 1350. Maximum waiting time: the value should be in the range of 4 to 1800. The minimum waiting time is less than the maximum waiting time. Under normal circumstances, the LAN side access device will receive the prefix address and DNS address sent by the router between the maximum waiting time and the minimum waiting time. In addition to LAN side device active request and raserver active renewal. Select M field: access device can get IPv6 prefix through DHCPv6. Select o field: access device can get DNS address and other information through DHCPv6.
Minimum Wait Time
Maximum Wait Time
Minimum wait time cannot be greater than the 3/4 maximum wait time.
It is used to display real-time statistics of congestion management queue of QoS.
SendPackets
DropPackets
SendBytes
DropBytes
Reset
Software Upgrade
Upgrade software version by the operation.
The device will reboot after upgrading.
Please select a new software/firmware image
Upgrade
Tracert test
Used to diagnose the network condition between this home gateway and the specified IP address or host name.
Trace route test
Tracert test
Maximum Hops
(1 ~ 64)
Idle Timeout
(1000-10000 MS)
IPTV
The IPTV page is used to configure the public multicast VLAN value of the broadband connection.
Connection Name
Public multicast VLAN
Igmp proxy enable
Restart the device. Use this operation to restart the gateway. Restore the factory configuration. Use this operation to restore the gateway to the factory default configuration.
Click this button to reboot the device.
Reboot
Click this button to restore the configuration to factory default settings. The device will reboot after operating.
Select the button to restore the factory configuration or default configuration, and the device will restart automatically when the operation is performed.
Restore Default
Local restore default configuration
Local restore factory configuration
Restart the device. Use this operation to restart the gateway.
ALG configuration
ALG setting: use this operation to turn on or off each alg switch. After setting, the new alg switch status will be displayed on the interface.
ALG
Media
Media settings: set the voice codec format and priority supported by the gateway. The selection of codec type controls whether a specific codec is selected, and the priority of codec determines the sequence of different codecs.
Media Negotiation
Remote Priority
Local Priority
Codec type selection
Codec Priority
Configuration
USB recovery configuration
You should recovery user configuration from USB storage device.
Enabling USB Restore function
Interaction establishment state
View the interaction establishment status.
Accept ITMS connection request status
ITMS not connected
ITMS reverse connection interrupted
ITMS reverse connection successful
WLAN function on and off settings, mode selection settings, channel selection settings, rate and transmit power adjustment settings.
WEP and TKIP encryption is forbidden in IEEE 802.11n mode. If switching this mode fails, please go to the security settings page to set the correct encryption mode.
Enable Isolation
Mode
Country/Region
Default settings
China
Australia
Brazil
Canada
Egypt
France
Germany
Greece
China Hongkong
Italy
Korea
Spain
United Kingdom
United States of America
<11n001>
Band Width
Channel
<11n002>
External Channel
<11n003>
SGI Enable
Beacon beacon frame transmission interval
Tx Rate
Transmitting Power
QoS Type
RTS Threshold
DTIM Interval
Fragment Threshold
Self service binding succeeded
Page binding succeeded
Hosts
Host Name is mapped with a IP Address, they can be configured by user to resolve DNS request.
The instance content of the gray button is dynamically obtained from the DHCP side and is not operable.
Virtual host configuration, enable virtual server configuration, and configure Wan host and virtual host related information. After configuration, Wan host can access virtual host by accessing WAN connection (IP address of WAN connection: WAN port).
WAN Host Start IP Address
WAN Host End IP Address
WAN Start Port
WAN End Port
LAN Host IP Address
LAN Host MAC Address
Virtual host port
LAN Host Address
IGMP SNOOPING
The bridge mode carries the multicast service, and both the routing connection and the bridge connection need to be turned on.
Enable IGMP snooping
ITMS settings
Need To be Added.
ACS URL
Connection Request URL
Connection Request Username
Connection Request Password
Enable Periodic Inform
Periodic Inform Interval
Enable Certificate
DHCP configuration, including whether to enable the DHCP service, the lease period, address range and other parameters assigned to the device.
Lease Time
One Minute
an hour
one day
Three days
a week
Start IP Address
End IP Address
Note: when the access device does not belong to the specified special device type, an address will be assigned from this address pool.
H248 Termination
To configure the physical and temporary endpoint names of a line, it needs to be consistent with the configuration on the softswitch.
Physical Termination Setting
Group By Group
One By One
TID Prefix
Extension Length
Physical TID
Temporary TID Prefix
Extension Length
Start Value
Line activation
DHCP configuration
1.Supporting the management of the Home Gateway's IPv6 address and it's prefix length. 2.IPv6 Dynamic Address management: IP Address: configure the IPv6 address and prefix length of the gateway. Enable DHCP Service: enable/disable DHCPv6 service function. DNS Refresh Time: configure the DNS refresh time distributed to client. Distributed Address List: DUID: DUID of client, identifies one client uniquely. IP Address, IPv6 address distributed to client. Residual Rent Time: the residual rent time of IPv6 address distributed to client.
DNS Refresh Time
Successful business configuration
How to get DNS on LAN side
WAN Connection
Local Application
Need To be Added.
Application Name
H248 Basic
H.248 protocol basic configuration, including softswitch address and port, register mode. Web displays the new configuration information after settings are completed.
Local Port
Preferred CA Identifier
Preferred Port
Alternate CA Identifier
Alternate Port
MID Flag
IPv4
Domain Name
Device Name
MID
Access Flag
Local Port
1024 ~ 65535
Preferred CA Identifier
Preferred Port
Alternate CA Identifier
Alternate Port
IPv4
Domain Name
Device Name
Telecom maintenance personnel can change the password of the end user account.
User management means that telecom maintenance personnel can change the password of the end user account.
User Privilege
Administrator
User
DSL broadband settings. When setting is completed, this page shows general setting information. There are two kinds of Connection mode, Routing and Bridge. Routing mode includes PPPoE(please select it to get IP address dynamically if your ISP uses PPPoE), DHCP(get IP address dynamically from your ISP), Static(set static IP address, the IP address format must be (x.x.x.x). For example, 192.168.0.100), etc. Bridge mode is transparent bridge(configure the CPE to be a transparent bridge device, it makes more than two networks to communicate with each other like in the same physical LAN). Some other basic options: VLAN, service type(UBR, CBR, VBR-nrt, VBR-rt) and encapsulation(LLC), etc.
Enable VLAN
Create
New VPI/VCI
Service Type
UBR
CBR
nRT_VBR
RT_VBR
PCR
SCR
MBS
xDSL Transfer Mode
Special device address configuration
Set the starting IP address and ending IP address of each device type.
1. Devices that are not in the range of the following address pool belong to computer devices by default.
2. The following address must be in the same network segment as the IP address of the LAN.
Start IP Address
End IP Address
Working mode of Middleware
To configure the working mode of middleware, you can select "enable middleware (including TR069 function)", "close middleware" and "enable middleware (excluding TR069 function)".
Switch between "turn off middleware" and "enable middleware (including TR069 function)"
"Enable middleware (including TR069 function)" and "enable middleware (excluding TR069 function)" cannot switch to each other.
Working mode of Middleware
Enable middleware (including TR069 function)
Turn off Middleware
Enable middleware (excluding TR069 function)
Supplementary service configuration
The configuration of voice supplementary service mainly includes: 1. Configuration of forwarding service switch and forwarding destination number; 2. Configuration of hotline service item and hotline destination number; 3. Call waiting: call waiting service switch; 4. Calling line identification display (class I): calling line identification display switch; 5 Calling line identification restriction: calling line restriction, caller ID switch on called side; 6. Reverse polarity switch.
Reverse polarity
Hotline service
Turn off the hotline
Tripartite marking
Conference URI
Call Waiting
Call line identification display (class I)
Call line identification restriction
Unconditional forward
Turn around when you are busy
No response forward
Forward to
Immediate Hot Line
Support Anonymous Call Reject
Delay Hot Line
Do not disturb
The hotline is here
Unregistered busy tone
Call Hold
Transfer
Malicious Call
Wan access settings. Use this operation to set the parameters related to URL filtering function. After setting, the new URL filtering function status will be displayed on the interface.
URL Address
1. The "enable" and "mode" switch will take effect immediately.
URL filter switch
Turn on the telnet function.
Enable telnet
Port filter settings
Port filter setting. Use this operation to set the parameters related to IP address filter function. After setting, the new IP address filter function status will be displayed on the interface.
Start Source IP Address
End Source IP Address
Start Destination IP Address
End Destination IP Address
Start Source Port
End Source Port
Start Destination Port
End Destination Port
DevIn
Mode
Static routing configuration
Need to select an interface, and then configure the network address, subnet mask.
WAN Connection
Rule Type
Need To be Added.
Destination
Classification Rules
Type
Source port (0 ~ 65535)
Destination port (0 ~ 65535)
Minimum
Maximum
Type
Source
value
H248 Auth
H.248 authentication configuration, including the requisite parameters in the access softswitch with authentication. Web displays the new configuration information after settings are completed.
Access Flag
No certification
Mac private authentication
MD5 certification
KI
P
G
MLD Proxy
It carries multicast service in IPv6 Routing connection mode.
Enable MLD Proxy
Sn registration
Logical Sn device registration.
SN
Device registration
Device registration status
Registering
login was successful
login has failed
It has been registered successfully, no need to register again
IP ADDRESSES ILLEGAL
WAN CONNECTION DISABLED
Device is saving data, please keep waiting...
Data saving timeout! Please re-operate.
Return to operating page
css/login.css
secs
Please login to continue...
Username
Password
Login
Your device is currently using the initial password! To protect your device from unauthorized users, this password must be changed at this time before you could access the device configuration page. Please use the new password for your next time login.
Password changed successfully, please login in with the new password.
Any value between 1 minute and 30 minutes is allowed.
Idle Timeout
You are banned.
Account logged in at other locations, you can either sign out the location, or click "Cancel" and try again later.
Exceed max user number, you can either logout a user listed below, or click "Cancel" and try again later.
Minutes
The changes of Timeout take effect after re-login.
All rights reserved by ZTE & copy; 2011
You are banned.
Help to learn the function and how to use this device.
Top
After setting the parameters related to broadband connection,the interface will display the general setting information: Port Binding setting; protocol mode includes IPv4,IPv6,IPv4/IPv6; under IPv4 protocol,the mode includes routing and bridging, in which the routing mode setting includes PPPoE (if ISP uses PPPoE, please select this option, this operation will dynamically obtain IP address), DHCP (automatically get one from ISP) IP address) and static (ISP configures a static IP address. The information to be input includes: IP address, subnet mask, preferred DNS server and standby DNS server, etc. the IP address must be in the correct format, and the four IP bytes are separated by "." (x.x.x.x). For example: 192.168.0.100), bridge mode setting (the device can be configured as a bridge device between LAN and ISP; it can make the communication of two or more networks appear to be on the same LAN physical connection);
VLAN mode
Multicast VLAN ID
Enable DSCP
DSCP
MTU
Time server settings
Display the current time, set time zone, server address, synchronization interval and bound WAN connection service type.
Current Date and Time
Time Zone
Primary NTP Server Address
Secondary NTP Server Address
Poll Interval
Enable Daylight Saving Time
Enable
DSCP
Dateline Standard Time, Eniwetok, Kwajalein
Midway Island, Samoa
Hawaii
Alaska
Pacific Time (US, Canada), Tijuana
Arizona, Mountain Time (US)
Central America, Central Canada
Eastern Time (US, Canada)
Atlantic Time (Canada)
Newfoundland
Brasilia
Mid-Atlantic
Azores
Casablanca, Monrovia
Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna
Athens, Bucharest, Istanbul
Baghdad
Tehran
Abu Dhabi, Muscat, Tbilisi
Kabul
Ekaterinburg,Chelyabinsk,Izhevsk
Madras, Calcutta, Mumbai, New Delhi
Kathmandu
Novosibirsk,Omsk, Barnaul
Rangoon
Bangkok, Hanoi, Jakarta
Beijing, Chongqing, Hong Kong, Urumqi
Osaka, Sapporo, Tokyo, Seoul
Adelaide
Moresby, Guam Port, Brisbane
Magadan, Petropavlovsk-Kamchatskiy
Auckland, Wellington
Nukualofa
Mountain Standard Time (US, Canada)
Chihuahau, La Paz, Mazatlan
Central Time (US, Canada)
Guadalajara, Mexico City, Monterrey
Bogota, Lima, Quito, Indiana (East)
Caracas, La Paz
Santiago
Buenos Aires, Georgetown
Greenland
Cape Verde Islands
Greenwich Mean Time: Dublin, Edinburgh, London, Lisbon
Belgrade, Bratislava, Budapest, Ljubljana
Sarajevo, Skopje, Warsaw, Zagreb
W. Central Africa
Brussel, Copenhagen, Madrid, Paris
Harare, Pretoria, Jerusalem, Cairo
Helsinki, kiev, Riga, Sofia, Tallinn, Vilnius
Minsk
Kuwait, Riyadh, Nairobi
Moscow, Saint Petersburg, Nizhniy Novgorod
Baku, Yerevan
Islamabad, Karachi, Tashkent
Sri Jayawardenepura, Astana, Dhaka
Krasnoyarsk,Norilsk, Abakan
Irkutsk,Ulan-Ude
Chita,Yakutsk,Tynda
Darwin
Canberra, Melbourne, Sydney
Hobart
Vladivostok, Khabarovsk, Uzhno-Sahalinsk
Fiji, Kamchatka, Marshall Is.
MLD Snooping
IPv6 bridging mode carries multicast service, and both routing connection and bridge connection need to be opened.
Enable MLD listening
Enable MLD Snooping Enhancement
Turn UPnP on or off.
Enable
SIP
SIP general configuration, including server configuration and function options.
Protocol selection
Softswitch SIP
IMS SIP
Local Port
Primary Proxy Server
Primary Outbound Proxy Server
Primary Proxy Port
Secondary Proxy Server
Secondary Outbound Proxy Server
Secondary Proxy Port
Register Expires
Register Server
Secondary Register Server
Unregister On Reboot
Enable Link Test
Disable
Passive
Active
Link Test Interval
Subscription switch
Disable
On
Associated with core network type
Note: it is associated with the type of core network, that is, NGN will be automatically closed in SIP and IMS will be automatically opened in SIP
Enable escape of # sign
Enable session updates
Session update cycle
Ping Test
Ping the input IP or host name.
Pinging,please wait...
Pinging,please wait a minute and refresh to obain the results!
Business registration status
Display the service status of each subscriber line of VoIP.
Register Status
Registered
Unregistered
Advanced
Some voice function settings: 1. T38 enable switch, used to configure whether the fax uses T38 transmission mode. 2. T38 a = fax enable switch is used to control whether T38 fax media in SDP carries a = fax field. 3. Fax and modem control mode option, which is used to configure how to switch between fax and modem after the corresponding signal is detected. 4. Echo suppression option, which can be configured to turn on or off for echo cancellation. 5. DTMF configuration option, used to set DTMF signal to RTP in band transmission or through 2833 event transmission. 6. Incoming and outgoing gain, which is used to configure the gain of voice in two directions. 7. Rfc2833 is used to configure the load type of 2833 package. 8. The jitter buffer option can be configured as adaptive or fixed to set the delay mode of voice.
T38 enable
T38: a = fax enable
Fax and modem control mode
Self switching
Controlled by Softswitch
DTMF
RFC2833
In band
RTP start port
RFC2833
RFC2198
Jitter Buffer
Fixed
Adaptive
Fixed Value
Minimum
Maximum
If the WAN Connection is not selected by users, the device will select a WAN Connection automatically.
Echo Cancellation
Disabled
Exhaled gain
Incoming gain
Shielded reverse polarity signal switch
Basic call control
Voice timer configuration.
Minimum fork interval
Maximum fork interval
Inter bit short timer
secs
ms
Bit interval timer
Off hook no dial timer
Long cry should not be a timer
Reminder tone timer
Busy tone timer
Digital Map
File uploading, please wait
Display DSL information, including current synchronization status, connection status, uplink and downlink rate, noise margin, line protocol, line attenuation, output power, channel type, uplink and downlink maximum rate, interleaving depth and annex type.
DSL current synchronization status
Link Status
Rate (uplink/downlink)
Noise margin (uplink/downlink)
Modulation Type
Line attenuation (up/down)
Downlink/uplink power output
Channel type (uplink/downlink)
Maximum rate (uplink/downlink)
Interleave depth
Annex Type
Profile
Display DSL information, including the current synchronization status and connection status of DSL.
Manually trigger the information report.
Report manually by information
Information reporting
Middleware server settings
Need To be Added.
MWS URL
IGMP PROXY
Multicast service is carried in routing connection mode.
Enable IGMP Proxy
USB backup configuration
You should backup user configuration on USB storage device.
There is already a backup file on the selected partition. Do you want to overwrite the original file?
USB device
Start Backup
No USB storage device detected!
SIP Account
Display the telephone number of each VoIP subscriber line.
SIP Account
Basic information of equipment
Display the equipment model, equipment identification number, batch number, hardware version number, software version number and other information.
Operator
China Telecom
Model
Equipment identification number
Batch Number
Hardware Version
Software Version
Boot Loader Version
Device Type
Device access type
If you leave the content in the right box blank, you will enable an empty template.
Click the business option in the left box to select and sort the priority, and click the business option in the right box to cancel.
Business to be selected
Prioritization
High
Low
You cannot add other types of business after internet type. Do you want to add it before it?
According to your configuration of each business priority, the device will automatically generate a template and apply it to meet your needs of each business priority.
Template settings
Basic Configuration
Some basic configuration of QoS, including the setting of QoS function enable, uplink bandwidth value, congestion scheduling algorithm, etc.
Enable QoS
The Total Upstream Bandwidth
Kbps (0 means unlimited bandwidth)
Queue Scheduling Algorithm
Dwrr queue bandwidth locking
DSCP/TC retag enable switch
802.1p Re-mark Model
DMZ configuration
DMZ configuration, DMZ enable switch, use this operation, start or close the DMZ function, after setting, the interface will display the new DMZ configuration information.
DMZ Host IP Address
DMZ Host MAC Address
Upload CA Certificate
After selecting a CA certificate, you can import the file to the device.
Chain
The uploaded certificate
CA certificate chain
Please select a CA certificate file
Import Certificate
Binding mode
Binding settings. If the mode is VLAN, you need to set the binding VLAN ID.
Binding mode
Port
When the binding mode is port binding, please go to the WAN connection page to view the details.
Static Prefix
Prefix is configured by user, it has two parameters valid lifetime and preferred lifetime, the valid lifetime must not smaller then preferred lifetime, it can be used to configure IPv6 GUA address on interface of device in LAN side. The way of configure address has two methods by RA and DHCPv6 Server.
Prefix
Preferred Lifetime
Valid Lifetime
IPv6 prefix management
Mode
static state
Prefix
prefix len
Prefix preferred lifetime
Prefix effective life
Mac filter settings
Set the MAC address filtering function. Use this operation to set the parameters related to the MAC address filtering function. After setting, the new MAC address filtering function status will be displayed on the interface.
1. In the white list mode, please configure the MAC address of the local computer, otherwise the network cannot be accessed normally.
2. MAC filtering takes effect in both IPv4 and IPv6.
Type
Route
Bridge+Route
IP
ARP
RARP
PPPoE
ALL
Source MAC Address
Destination MAC Address
3. The "enable" and "mode" switch will take effect immediately.
DNS
Routing Table
View the routing table information, such as: network address, subnet mask, gateway, interface information.
WAN Connection
It is used to configure the related functions of DMS.
Enable
DMS Name
Library Rescan Method
Disabled
Auto
Customized
Rescan Cycle
Media Source
empty
Rule
Need To be Added.
(only for IPv4 message)
(only for IPv6 message)
802.1p Re-marking
DSCP Re-marking
TC re labeling
CAR(Committed Access Rate)
Configuration
Log management, set log enable, log level, clear log. Log query, display the log content under the current level.
Log enable
Log Level
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug
Clear Log
Domain Name
Domain Name is represent a small network in LAN side with a name space, it can be configured on interface of LAN side.
Domain Name
UNKNOWN
HALF DUPLEX
FULL DUPLEX
WAN
Attack protection settings
Attack protection settings, you can turn on or off anti attack protection.
Entrance speed limit setting
It is used to configure the entrance speed limit interface and speed limit value of QoS to realize the entrance speed limit of message.
DevIn
Rate
DHCP Port Service
Check the DHCP service switch status of each port.
If a port is checked, the DHCP service of the port is closed.
Multi-SSID Settings
SSID name, enable, broadcast cancel settings.
(
~
(bit character)
Prefix Delegation
Prefix can be got from DHCPv6 prefix delegate, it associates with a Wan Connection, and can be assigned to device in LAN side by RA and DHCPv6 Server.
It is used to configure the parameters of the congestion management queue of QoS and manage the congestion of packets.
Weight
Queue Algorithm
Click here to watch the statistical information of QoS queues.
IPv6 connection information
No
Yes
LAN IP Address
Prefix
Delegating Prefix Address
NoLink
LAN
IPv4/v6 address
Static allocation of client configuration
Static allocation of client configuration, based on DHCP configuration, provides the binding relationship between MAC address and IP address.
Dynamic routing configuration
Dynamic routing, enable RIP, RIPv1 and RIPv2 protocol can be supported, including RIPv2 authentication.
Enable RIP
Version
Enable Notify
Authentication Type
Authentication Key
None
Simple Text
MD5
platform
Game
USB
Display information of USB devices connected.
No USB device detected!
Device Name
Vendor ID/Product ID
SIP Accounts
SIP account information configuration, including phone number, password, authentication user name, etc.
Enable
SIP Account
Authentication user name
Yes
No
Enable the switch, and use this operation to start or close the DDNS function. DDNS setting: use this operation to set the parameters related to DDNS. After setting, the new DDNS status will be displayed on the interface.
Service provider
China Telecom
Service Type
Server
Domain
Hostname
New Tunnel Name
Manual AFTR
Manual DNSv4
Create Tunnel
WLAN function on and off settings.
System is busy, please try accessing Web pages later.
Caller ID
Caller ID Mode
Caller ID Time
FSK
DTMF
FSK&DTMF
Disable
On
Auto
Caller ID
CID Obtain
FROM Obtain Only
Priority From PAI
Preferred Username
FSK format
Single data message format
Composite Data Message Format
Bound WAN connection service type
There is no network connection you need to set up for surfing the Internet.
Fast Internet access
Best forwarding performance
Best compatibility
Manual configuration
The MTU values of multiple network connections used for Internet access are inconsistent. You can maintain the status quo or unify the MTU values through the following settings.
The MTU value of the network connection used for surfing the Internet is in the best setting. You do not need to set it again.
By modifying the MTU value, different Internet experience can be achieved. If some services cannot be used, it needs to be changed back to the "best compatibility value".
Prefix Management
This page is used to view and modify the parameters of the distribution prefix. The prefix can be automatically obtained by WAN connection or statically manually configured. The prefix automatically obtained by WAN connection only supports modifying the distribution mode, while the statically configured prefix supports modifying the preferred time, effective time and distribution mode. In this case, it should be noted that the preferred time must be less than or equal to the effective time.
Prefix Source
Online(L)
AutoConf(A)
Preferred/Valid Lifetime
L/A
Report the number immediately
After reporting the service number to the network management system, the system will access the network.
Broadband access number
IPTV access number
VoIP access number
Business management
Business name
Business value
ARP Table
ARP Information View.
Network Address
MAC Address
WAN Connection
Are you sure to show all ARP entries? Click "OK" to display all, or click "Cancel" to display part of ARP entries.
MAC Table
MAC Information View.
Port
MAC Address
Aging Time
Are you sure to show all MAC entries? Click "OK" to display all, or click "Cancel" to display part of MAC entries.
(seconds)
More than the maximum number of registrations! Sorry, unable to register for the time being, please call customer service hotline 10000 to help solve!
Registering, please try again later!
Registration successful.
The terminal has successfully registered with ITMS platform, and the next step is to issue services to ITMS platform
The ITMS platform is registered successfully and the service is distributed successfully. The gateway needs to be restarted. Please wait.
The ITMS platform is registered successfully and the service is distributed successfully.
ITMS platform registered successfully, business distribution failed, please contact no. 10000.
ITMS platform registration is successful, business distribution timeout, please contact no. 10000.
ITMS platform registration failed, password does not exist, please try again.
ITMS platform registration failed, loid does not exist, please try again.
ITMS platform registration failed, loid and password do not match, please try again.
ITMS platform registration timeout, please check the line and try again.
The terminal has been successfully registered on the ITMS platform, so there is no need to register again.
ITMS platform registration failed, password does not exist, please try again. (number of attempts remaining:
ITMS platform registration failed, loid does not exist, please try again. (number of attempts remaining:
ITMS platform registration failed, loid and password do not match, please try again. (number of attempts remaining:
ITMS platform registration timeout, please check the line and try again.
ITMS platform registration is successful, business distribution timeout, please contact no. 10000.
(error: the entered loid cannot be empty, please re-enter.)
(error: the input loid contains illegal characters, please re-enter.)
(error: the password you entered contains illegal characters, please re-enter.)
Return to login page
The user business configuration is successful.
Registering, please wait.
Back
Close the page
Your registration attempts failed three times in a row, please wait 60 seconds before re registering.
At present, there are more
Seconds!
Please plug in as required
LOID
Password
Cancel
Business registration
Middleware (including TR069) mode does not support device registration.
The course of business issued, please use the business later.
Entering registration page.
Not connected to the Internet tube, unable to register the device.
It has been registered and successfully distributed.
E8-c terminal registration
The terminal is registering OLT
The terminal failed to register OLT. Please check whether the loid and password are correct. If all are correct, please call the support phone to check whether the pre deployment data configuration of OLT PON port is normal.
The OLT registration of the terminal is successful. The next step is to obtain the management address
(prompt: the password of e8-c terminal is empty and cannot be filled in.)
The OLT registration of the terminal has timed out. Please confirm whether the PON access mode and loid are consistent with the construction order. If all are normal, please call the support phone to check whether the PON board of OLT is normal, = = whether the pre deployment data configuration of PON port is normal.
register
E8-b terminal registration
Optical fiber
DSL line
Ethernet cable
The terminal is getting the management address
The terminal obtains the management address successfully, and the next step is to register ITMS platform
The terminal failed to obtain the ITMS management channel, please call the support phone to check whether the configuration of the terminal to the bras channel and the bras address pool is normal.
The terminal is registering ITMS platform
The ITMS platform is distributing services, please do not plug
Or power failure
After entering the loid and password to register, do not plug at will in the registration process
Simulation
Setting basic configuration for Simulation.
Simulation Type
Simulation
Start
Stop
Retry Times
Simulation MAC
VendorClassID
PingDestIPAddress
PingTimes
PingTimeOut
Simulation Result
Enable
ARP detection period
ARP detection
Enable: can turn on the switch of ARP detection cycle and ARP aging time; ARP detection cycle: used to configure the sending interval of ARP message. ARP aging time: used to configure the aging time of ARP entries learned by gateway. This function enables the gateway to detect ARP regularly and configure ARP aging time.
ARP aging time
VoIP QoS
It is used to set the level of signal or media and change the quality of service.
DSCP of Signal
802.1P of Signal
DSCP of Media
802.1P of Media
No Change
Confirm
Cancel
Attention!
The serial number of the terminal is required:
Are you sure you want to close this page?
TestLink Flag
Disable
ServiceChange
Notify
VoIP Services
Configure heartbeat mode
Ordinary number graph
Special number graph
PBX prefix
Please input ordinary number chart:
Please input special number chart:
Special number graph enable
PBX outgoing prefix enable
PBX outgoing prefix
Number table configuration. Among them, the number table configuration item "X" represents numbers 0-9, and "." represents several numbers.
Enable telnet
Enable telnet on WAN side
Telnet Configuration
Telnet configuration: used to turn on or off telnet and WAN side telnet functions.
Start option125 service
(the last 64 bits are valid)
VoIP Protocol Switch
Swtiching VoIP Protocol.
The device will reboot after the VoIP Protocol is changed.
VoIP Protocol
Reboot failed, please reboot device mannually.
Are you sure to switch VoIP Protocol?
Confirm
Cancel
Loopback detection configuration
Basic Configuration
Basic configuration of loopback detection
Loopback Enable
Purpose mac
Broadcast Address
BPDU Address
Ethernet Type
Send Interval
Port Closing Time
Loopback Recovery Time
VLAN
ms
secs
XDSL vector configuration
XDSL vector enable configuration.
Changes to the DSL bonding configuration will take effect after the system is restarted.
DSL bonding enable
Enable xDSL vectoring
Maximum number of access users
Used to view and modify the maximum number of user accesses.
register
cancellation
Hard restart
Operation
All equipment
object
Phone
Cancellation of agreement
It is used for registration, cancellation and other operations to make ONU automatically register or cancel with SS.
Registration retry interval
No PPPoE type WAN connection available!
Broadband configuration
Basic wireless settings
Internet account settings
Broadband connection configuration, select a WAN connection, modify its user name and password to ensure that the device can access the Internet.
RTP Link Detection Flag
Number Match Flag
DigitMap L Timer
DigitMap S Timer
DigitMap T Timer
DigitMap Z Timer
Intelligent Match
Long Match
Short Match
Heartbeat duration
Maximum matching
Minimum matching
Graph matching pattern
G. 711 redundancy
There is no redundancy
1 packet redundancy
2-Pack redundancy
Number cache enable
WPS
Configure WPS mode, such as PBC.
PIN Access Mode
Device PIN
Enrollee PIN
WPS Mode
Generate
Apply
WPS Mode switching
will take effect immediately.
Block
Permit
Configure ACL policy and MAC.
silence
Modifying the IP address requires restarting the gateway. Do you want to continue modifying?
Fax Protocol
T30
T38
Enable
Disabled
Prompt information
Error
<1001>
Username cannot be empty.
<1002>
User information is error, please input again.
<1003>
You have input the wrong username or password for three times. Please try again later.
cannot be empty, please input again.
cannot be empty, please select again.
's length is error, please make the length of characters within
Characters between.
is error, please input legal Domain Name.
is error, please input legal URL.
is error, please input legal Host Name.
is error, please input legal Username and Password.
is error, please input legal IP Address.
is error, please input legal Mask Address.
is error, please input legal MAC Address.
is error, please input legal file path.
is error, please input legal Telephone Number.
is error, please input legal SSID Name.
is error, please input legal characters.
is error, please input legal integer.
is error, please input integer in the range of
Integer between.
Current operation is ineffective, please check whether
is legal.
Error, please input 13 ASCII characters or 26 hexadecimal digits.
Error, please input 5 ASCII characters or 10 hexadecimal digits.
Current operation is ineffective, please check configuration parameters.
is error, please input again.
Your new password and the confirmed password do not match, please input again.
is error, cannot be all zeros.
Your IP Address and Mask Address do not match, please input again.
Data exceed available range, please reconfigure.
does not permit to be repeated, please input again.
is error, please input legal VPI/VCI.
is error, please input legal gateway.
Please input the value of
Please input integer.
is error, please input legal IP Address or Domain Name.
Please choose at least one modulation type.
Error. The configuration instance is excessive. Please delete some configurations.
The ingress can not be the same with the egress, please input again.
cannot be larger than WAN End Port, please input again.
There is an error in adding an instance. The name cannot be the same as the name of an existing instance.
There is an error modifying the instance. The name cannot be the same as other instance names.
is error, cannot input all zeros. Please input again.
Configuration of Port must come with the Configuration of TCP or UDP.
is error, it must begin with 'http:\/\/' or 'https:\/\/'.
is error, its length couldn't be more than 10.
is error, please input integer in the range of
or -1.
The SCR should be smaller than the PCR ,please input again.
The configuration to the start/end port of WAN&LAN interface shall be all zeros or adopt none.
Start Source IP Address should be less than or equal to End Source IP Address , please reset.
Start Destination IP Address should be less than or equal to End Destination IP Address , please reset.
DHCP Start IP Address should be less than or equal to DHCP End IP Address , please reset.
DHCP Start IP Address should be in the same subnet as LAN IP Address, please reset.
DHCP End IP Address should be in the same subnet as LAN IP Address, please reset.
If End Destination port is not empty, Start Destination port cannot be empty.
is error, cannot be 127.0.0.1, please input again.
is error, cannot be 255.255.255.255, please input again.
If End Source IP Address is not empty, Start Source IP Address cannot be empty.
If End Destination IP Address is not empty, Start Destination IP Address cannot be empty.
The max value cannot be smaller than the min value, please input again.
is error, please input the integer between 1 and 4294967295.
Start Source port should be less than or equal to End Source port , please reset.
Start Destination port should be less than or equal to End Destination port , please reset.
If End Source port is not empty, Start Source port cannot be empty.
LAN IP Address,DHCP Start IP Address and DHCP End IP Address should be in the same subnet , please reset.
Please select a file to upload.
The item has been deleted.
System is busy, please try again later.
The connection trigger is error.
It is connecting now.
It is disconnecting now.
It has been connected.
It has been disconnected.
is error, please input legal IP Address or Host Name.
Start IP address is not in designated segment, please reset.
End IP address is not in designated segment, please reset.
Start IP address and End IP address are both not in designated segment, please reset.
Start IP Address should be less than or equal to End IP Address, please reset.
The Maximum shall not be less than the Minimum.
Same type already exists, cannot duplicate.
Configuration of Port must come with the Configuration of TCP or UDP.
Out of range, 10 records at most.
LAN IP Address can not be equal to Secondary IP Address, please reset.
must be greater than
The configuration to the start/end port of WAN&LAN interface shall be all zeros or adopt none.
WAN Start port should be less than or equal to WAN End port , please reset.
LAN Start port should be less than or equal to LAN End port , please reset.
Mapping port range should be equal to WAN port range, please reset.
The device can't be removed now, please retry later.
DownLoad path is error, such as /pathname/filename
Device restarting will take about 2~3 minutes, please wait patiently.
This page is under construction now......
Session timeout, please login again.
Are you sure to reboot the device?
Are you sure to reset settings?
Resetting settings will take about 3~4 minutes, please wait patiently.
There is no data, please add one first.
There is no data.
Are you sure to end maintaining device?
Over Maintain will spend a moment, please wait patiently.
File upload failed.
File URL error.
Download File failed.
Integrity check failed.
Flash File failed.
Can't upgrade now,please wait a moment and try again.
If End IP Address is not empty, Start IP Address cannot be empty.
Start IP Address should be less than or equal to End IP Address, please reset.
The value of LAN start/end port must be all zeros or include none zero.
WAN Start port should be less than or equal to WAN End port , please reset.
LAN Start port should be less than or equal to LAN End port , please reset.
LAN port range should be equal to WAN port range, please reset.
Another user has logged in to the system,
please retry later...
Maximum attempts exceeded,
An error occurred, please try again later.
Access denied, login was cancelled.
Source MAC Address and Destination MAC Address can not be empty at the same time.
RFC2833 PT can not be equal to RFC2198 PT.
The Configuration of
is not complete, the rule does not take effect!
Root MAC Address cannot be the same as WDS Interface MAC Address. Please input again.
Repeater MAC Address cannot be the same as WDS Interface MAC Address. Please input again.
Repeater MAC Address has already be used. Please input again.
is error, its length can not more than
has invalid character, please input again.
can not be empty, please input again.
The confirm password is not the same with the new password, please input again.
Max times error,can not register again.
System in register,please try later.
Web already login,
You have input the wrong username or password for three times. Please try again a minute later.
Register fail,
Max times error,please call 10000 if you have any questions.
Please try agin!
Please make sure that the difference between Start Port and End Port is in the range of 1~9.
Start Port should be smaller than End Port ,please input again.
please login again.
The configuration items of port trigger, UPnP and port forwarding conflict.
Configuration item conflict of, this priority is higher, configuration takes effect.
The configuration conflicts with settings of
Port Trigger and UPnP
Port Mapping and UPnP
is error, please input the characters between '0' and '9'.
's length is error, please make the length of characters is 8.
Confirm New PIN and New PIN do not match, please input again.
Confirm PIN and PIN do not match, please input again.
Browse media source error.
Please input legal time period.
Please input legal time period.
Please choose some day.
The instance is added incorrectly, and the user ID is the same as or conflicts with the existing user ID.
The instance modification is wrong, and the user ID is the same as or conflicts with the existing user ID.
is error, please input legal IPv6 Address.
The maximum wait time must be larger than the minimum wait time, please input again.
The preferred lifetime can not be larger than the valid lifetime, please input again.
When the value of Prefix's Length is 0,the value of Prefix must be '::'.
When the value of Prefix is '::',the value of Prefix's Length must be 0.
The value of Gateway must not be ::, please input again.
cannot be empty or 'Create WAN Connection', please input again.
Logout success!
Please choose at least one Profile.
only allows the scale between 192.0.0.2~192.0.0.6.
configure error,tunnel type is not allowed to configure gateway.
Select Manual to obtain address, must also configure AFTR and DNSv4.
Target session is not exists, please select another one.
Invalid password, please input another one.
Service Temporarily Unavailable
Source MAC Address can not be empty.
is invalid, please input again.
is error, please input hexadecimal digits.
's length is error, please make sure the length of charaters is even.
Please select a user.
is error, please input legal positive integer.
<1006>
cannot be NULL.
Error, please input legal Sn value.
This page has expired, please refresh and try again.
Your browser's cookie functionality is turned off, please turn it on before login.
Current operation is ineffective, please check configuration parameters.
System is busy, please try again later.
Data exceed available range, please reconfigure.
Database operation fail.
Current operation is ineffective, please check whether
is legal.
The connection trigger is error.
It is connecting now.
It is disconnecting now.
It has been connected.
It has been disconnected.
Save failed.
Save succeeded.
Source IP Address can not be multicast IP Address.
IP Address can not be reserved IP Address.
Data exceed available visible range.
not cfg
cfg
Username or password is error in the file server.
The file server is unusable.
File does not exist.
Unable to connect to remote host.
The file server is unreachable.
The file is error for writing.
It is overtime for download file.
The testing file is too small, please input again.
Other errors, please input again.
Please delete all filter rules of the User.
Data exceed available range of routing, please reconfigure.
Policy rouete input repeatly,please set again.
Source IP Address and Source Mask do not match, please input again.
Destination IP Address and Destination Mask do not match, please input again.
Username is error,please check configuration parameters.
The password is wrong, please check the configuration parameters.
The user permission is not enabled,please check configuration parameters.
User roles is error,please check configuration parameters.
User name is repeated,please check configuration parameters.
User type does not match,please check configuration parameters.
IPv4 specific classification items and those of IPv6 cannot be configured at the same time.
This wan link cannot be set as the default route, please choose another one.
WAN Connection GUA is not from DHCPv6,Manual AFTR and Manual DNSv4 are required.
Administrator password should contain numbers, uppercase letters, lowercase letters. And the length of it should not be less than 6.
MTU must not be greater than that the MTU of underlying WAN Connection minus 20.
32 minus the length of IPv4 mask plus the length of 6rd prefix is greater than 64.
relative data exists.
conflict with existed configuration.
The DevIn and the DevOut can not be both WAN-side interface, please reconfigure.
The DevIn's speed limit function can not coexist with the DevOut's, please reconfigure.
The queue number of this interface exceeds the maxinum allowed, please reconfigure.
Priority can not be repeated, please reconfigure.
The priority of DWRR algorithm queue should not be greater than the SP algorithm, please reconfigure.
The Classification information option of classification rule is not configured.
Another simulation is being performed, please try again later.
IEEE 802.11n Only mode cannot support WEP and TKIP encryption algorithm, please change settings.
This page has expired, please refresh and try again.
This page has expired, please try again.
Please create a new bridge wan connection of other type, bind the SSID2 port, and then try the configuration again.
Contains illegal characters (\ ": *? \ \ < > |), please re-enter.
Error in adding. It cannot be the same as the existing data item name.
"Enable middleware (including TR069 function)" and "enable middleware (excluding TR069 function)" cannot switch with each other.
The correct format is: path name/file name, such as: path/ file.doc .
The source start IP is inconsistent with the source end IP. It must be an IPv4 address or an IPv6 address at the same time. Please reset it.
The destination start IP is inconsistent with the destination end IP. It must be an IPv4 address or an IPv6 address at the same time. Please reset.
The source IP address type is inconsistent with the destination IP address type. It must be an IPv4 address or an IPv6 address at the same time. Please reset.
When the source start IP and the source end IP are IPv6 addresses, their values must be the same. Please reset.
When the destination start IP and destination end IP are IPv6 addresses, their values must be the same. Please reset.
Please input legal time period.
Configuration item conflict of, this priority is higher, configuration takes effect.
The configuration conflicts with settings of
Port Trigger and UPnP
Only one of DSCP and TC can be set
Error, please enter an unsigned integer that is not 0.
If the format is wrong, the path name is/path.
Rfc2833 and rfc2198 payload values cannot be equal, please re-enter.
VLAN ID must be filled in pairs, please re-enter.
VLAN ID is wrong. Please enter an integer between 1 and 4094.
VLAN ID pair cannot be repeated, please re-enter.
More than the maximum number of registrations! Sorry, we can't register right now.
The minimum cross time interval cannot be greater than the maximum cross time interval, please re-enter.
The port configuration of UPnP or other virtual hosts conflicts.
is error, please input legal IPv6 Address or Host Name.
Please select a configuration item.
Does not match subnet mask, please re-enter.
Not allowed to be empty at the same time, please re-enter.
.
Error, not a 4-digit hexadecimal number.
Error, please enter the VLAN range of 1-4094, each VLAN is separated by a comma, up to 10 VLANs are supported.
Integer between Or 0.
Please enter at least one DNS address.
Error, please enter the legal IPv6 address.
Error, preferred life cannot be less than effective life.
Error, please input multiple of 10.
If the input is wrong, the minimum time interval of the fork spring should be less than the maximum time interval of the fork spring.
Invalid. You must choose one of the three options.
Error, SSID1 cannot be set to the same name as SSID2.
Are you sure you want to restore the default configuration locally?
Are you sure you need to restore the factory configuration locally?
It takes 3-4 minutes to restore the default or factory configuration, please wait patiently.
Error, please input legal hexadecimal number.
Error, please input even number of hexadecimal digits.
Not assignable, please enter
Address between.
The WAN or LAN properties of the inbound and outbound interfaces cannot be the same.
The current configuration conflicts with DSCP retagging.
The current configuration conflicts with TC retag.
The current configuration and classification type settings conflict.
The current configuration and classification type settings conflict.
The same classification rule cannot contain both v4 and v6 specific configurations.
VLAN configuration rules: The VLAN range is 1-4094. Each VLAN is separated by commas and cannot be repeated. A maximum of 10 VLANs are supported. untagged indicates that VLANs are not configured.
Unregistered and unauthorized
Registered but unauthorized
Registered and certified
Link Status
Alarm
Quality of service alert
Your device is currently using the initial password! To protect your device from unauthorized users, this password must be changed at this time before you could access the device configuration page. Please use the new password for your next time login.
processing error alarm
Communication alarm
Environment alarm
Abnormal voice link
LOID
LOID State
Init State
Authentication Success
LOID is Wrong
LOID OK , but password is wrong.
LOID conflict
SN
Initial State(o1)
Standby State(o2)
Serial Number State(o3)
Ranging State(o4)
Operation State(o5)
POPUP State(o6)
Emergency Stop State(o7)
Unknown State
ONU state
Password
Password
Configure password take effect after rebooting the device.
Optical Module Supply Voltage
Optical Module Input Power
Optical Module Output Power
Operating Temperature of the Optical Module
Optical Transmitter Bias Current
FEC State
Online
Unavailable
Encryption mode
0.1uW
1/256°C
100uV
2uA
Gemport not configured, no statistics!
dBm
°C
uV
uA
Enable
secs
FEC error packets
Packet loss
Number of packets sent
Number of received packets
Number of unicast packets sent
Number of unicast packets received
Number of multicast packets sent
Number of multicast packets received
Number of broadcast packets sent
Number of broadcast packets received
Loid configuration is used to configure loid and password and register with OLT.
statistical information
USB uninstall
IPTV
Alarm information
Number of frames/bytes received by PON port
Number of frames/bytes sent by PON port
Number of frames sent by PON port
Number of frames received by PON port
Error Frames
ring voltage vpk
loop current
open circuit voltage
Configuration will take effect only after the device is rebooted.
Vpk
mA
V
Configure ringing voltage, loop current and open circuit voltage information.
SLIC configuration
Repair mode
Enter the repair mode, and use this operation to switch the equipment to the repair mode.
Select this button to enter the repair mode
Enter repair mode
Repair mode set successfully.
Note: changing VLAN mode will clear the original VLAN value!
establish
silence
On
Disable
Do you want to enable the silent function of ONU in the loid authentication mode
Loopback detection configuration
Basic Configuration
Basic configuration of loopback detection
Loopback Enable
Purpose mac
Broadcast Address
BPDU Address
Ethernet Type
Send Interval
Port Closing Time
Loopback Recovery Time
VLAN
ms
secs
fail
pass
Intelligent diagnosis system
Enable
File upload destination URL
FTP port
Intelligent diagnosis system: check the URL, the TFTP port, and open and close the enable function.
DHCP address pool allocation information
Assigned IPv4 address
Client name
DHCP server address pool allocated information (V4), including client name, IP address, MAC address, remaining lease term, etc
PON Serial Number
Password
OLT registration status
ITMS registration status
Received optical power
Registration is normal
Failed to register. Please check the power of receiving light or confirm whether the loid is correct
The optical power is too low, please check the optical path or ODF for wrong connection
The optical fiber is not connected properly. Please check the optical path or ODF for wrong connection
ITMS management channel status
Internet (Internet service)
VoIP (voice service)
ITV business
Channel (WAN connection) status
normal
abnormal
IP address acquisition method
Route
Bridge Connection
(DHCP automatic acquisition)
(terminal built-in dialing)
(computer dialing)
(automatic acquisition by ITV terminal)
(static configuration)
IP address obtained
Dial up status
Bridge in the computer terminal to see the specific state
Voice registration status
Normal registration
Network (SBC) unreachable
Authentication failed
Other anomalies
The connection is normal
ISP TIME OUT
USER DISCONNECT
ISP DISCONNECT
Disconnected in Idle Traffic
FORCED DISCONNECT
AUTHENTICATION FAILURE
IP configuration error
OTHER
Failed to register. Please check the power of receiving light or confirm whether the loid is correct
Display the device model, device identification number, home gateway status, OLT registration status, ITMS registration status, received optical power, status of each service channel and other information.
Download Log
Download log file from the device
EPON State
Discard Frame
Accept Frame
Received BLOCK
Transmission BLOCK
EPON information
Display EPON status, FEC status, encryption mode, input power of PON port (unit: dBm), output power of PON port (unit: dBm), power supply voltage of optical module (unit: microvolt), bias current of optical transmitter (unit: microampere), operating temperature of optical module (unit: degree) and other information.
Display EPON status and other information.
Display statistics of PON ports.
The maintenance personnel can forcibly change the password of the end user account.
User management means that the maintenance personnel can change the password of the end user account.
<1006>
cannot be NULL.
is error, please input legal LOID Name.
is error, cannot input all digitals. Please input again.
is error, legal input:\"a-z,A-Z,0-9\".
Error, not a 4-digit hexadecimal number.
Error, please enter the VLAN range of 1-4094, each VLAN is separated by a comma, up to 10 VLANs are supported.
Please enter at least one DNS address.
The tag mode needs to be configured with vlan. If you do not need vlan, please switch the untag mode.
Device restarting will take about 2~3 minutes, please wait patiently.
Are you sure to reboot the device?
Error, please enter 12 characters, the first 4 letters and the last 8 hexadecimal numbers.
Old Password is error,please check configuration parameters.
China Mobile
China Mobile
RMS did not distribute remote service configuration
Receiving remote service configuration for ITMS
(e home terminal is starting)
(no remote management WAN connection)
(remote management WAN connection not in effect)
(no management channel DNS information)
(no ACS configuration parameters)
Not reported
Reporting
Successful report
Report no response
The reporting process was interrupted
Report verification failure
(ACS domain name resolution failed)
Accept RMS connection request status
ITMS not connected
ITMS reverse connection interrupted
ITMS reverse connection successful
RMS server
WLAN parameter configuration
Need To be Added.
Select WAN connection
IP Version
Wan to LAN side IP filtering: use this operation to set the parameters related to the IP address filtering function. You must set the interface and select WAN connection. After setting, the new IP address filtering function status will be displayed on the interface.
LAN to WAN side IP filtering: use this operation to set the parameters related to the IP address filtering function. After setting, the new IP address filtering function status will be displayed on the interface.
Filter switch: with this operation, the IP address filter function can be enabled or disabled, including the IP filter switch from Wan to LAN side and LAN to WAN side.
Wan to LAN side IP filtering
LAN to WAN side IP filtering
Reboot
Restore configuration
Equipment diagnosis
Basic Configuration
Mode
Enable
The "enable" and "mode" switch in the page will take effect immediately.
Restart the device. Use this operation to restart the gateway.
The default configuration of local recovery is local recovery; Local recovery of factory configuration is remote recovery (only administrator can operate).
Enable
Name
WAN Connection
Protocol
Start Source IP Address
End Source IP Address
Start Destination IP Address
End Destination IP Address
Start Source Port
End Source Port
Start Destination Port
End Destination Port
Modify
Delete
Display device alarm, service quality alarm, processing error alarm, communication alarm, environment alarm and other information.
Alarm
Quality of service alert
processing error alarm
Communication alarm
Abnormal voice link
Environment alarm
DHCP Release First
Enable
WLAN sharing configuration
Configure WLAN share enable and share mobile number
WLAN sharing enable
WLAN share mobile number
Enable USB print server
USB print server
Enable/Disable USB print server.
Printing
Password
authentication
USB shared
Enable to enable USB shared printing and view printer information.
Shared printing
Equipment number
The name of the manufacturer of the device
Product name of the device
PID number of equipment
Vid number of the device
PON link connection information
LAN interface information
Interactive establishment
WLAN
Samba sharing
Provide the file-sharing services to LAN side users. Windows users can access shared through the following URL: \\hostname, \\hostname\samba, \\LAN IP Address, \\LAN IP Address\samba.
Enable Samba Server
Auto Run Samba Server
(2 ~ 15 characters)
Anonymous
Samba Username
Samba Password
(1 ~ 32 characters)
(0 ~ 32 characters)
Enable Samba read only
Samba path
Note: the samba shared directory path must be in the/MNT directory.
Uplink QoS configuration
According to your configuration of each business priority, the device will automatically generate a template and apply it to meet your needs of each business priority; some basic configuration of QoS can be carried out.
set up
Log view
Set log enable, log level, etc.
Check the log.
Log not enabled!
FTP
FTP server settings
FTP client settings
Enable
Disabled
FTP server settings (after the correct configuration, it can be used as a server); FTP client settings (after the correct configuration, it can automatically download files from the specified server address to the storage space of the home gateway to realize resource sharing).
Enable FTP Server
FTP Username
FTP Password
FTP Security
Anti port scanning
Anti DoS attack
Anti land attack
Prevent Ping of death attack
Anti SYN flooding attack
Preventing ICMP redirection attack
Anti Smurf attack
Prevent WinNuke attack
Speed limit of DHCP protocol message
IGMP protocol message speed limit
ARP protocol message speed limit
* 100 pps
The attack protection setting can turn on or off the anti attack protection, and configure the message suppression function.
Equipment diagnosis
Basic Configuration
Mode
Enable
The "enable" and "mode" switch in the page will take effect immediately.
Start diagnosis
Get diagnostic results
LAN port, WLAN, PON port, voice hardware fault detection function.
LAN port
WLAN
PON port
Voice hardware
Test items
test result
VoIP diagnosis
The voice pots port has the function of internal and external line test.
Voice line
Test items
Test mode
Test items
test result
Start diagnosis
Get diagnostic results
Inner line feeding voltage test
Inner line bell flow test
Internal loop current test
External line full voltage test
Full insulation resistance test of external line
External line full capacitance test
Test on the number of ringing current of external line
Normal mode (line busy)
Strong test mode
AC voltage: Tip ring
AC voltage: Tip GND
AC voltage: Ring GND
DC voltage: Tip ring
DC voltage: Tip GND
DC voltage: Ring GND
Resistance: Tip ring
Resistance: Tip GND
Resistance: Ring GND
Capacitance: Tip ring
Capacitance: Tip GND
Capacitance: Ring GND
ring voltage vpk
Ringing number
Loop current
Loop resistance
Feed voltage
The test item has not been tested or the test result has expired, you can retest!
underway
, please get the test results later!
, the test has ended, you can get the test results or test other items.
If the test fails, you can retest or perform other tests.
Ohm
Operation failed, please try again!
HALF DUPLEX
FULL DUPLEX
Mode
Rate
WAPI Key Mode
WAPI Key
Certificate server IP
Certificate Management
Certificate Uploading
character
Hexadecimal digit
NOTE:
AS Certificate File
AP Certificate File
AP Certificate Password
Upload
Please upload as certificate first.
Certificate Type
Certificate Type switch will take effect immediately.
Back
File uploading, please wait
The device is in the process of upgrading, please do not disconnect the power and wait patiently
Software upgrading completed successfully. The device is rebooting now, please wait ...
Uploading, please wait
The operation completed successfully. The device is rebooting now, please wait ...
The operation completed successfully.
Uplink speed limit mode
Speed limit of uplink interface
Uplink vlantag speed limit
Uplink IPv4/6 range speed limit
Speed limit configuration
Speed limit configuration, in the form of classification parameter/speed limit value: uplink interface example: lan1/500; uplink VLAN example: 46/500; uplink IP example: 192.168.1.30-192.168.1.39/500.
Downward speed limit mode
Downlink interface speed limit
Downlink vlantag speed limit
Downlink IPv4/6 range speed limit
1. Based on the user interface speed limit, set it in "M1/N1, m2/N2" mode.
Where: "m" is the user interface, and the format is lan1, lan2, ssid1, ssid2, and so on.
"N" is the speed limit value, the unit is 512Kbps
2. Based on the VLAN speed limit on the user side, set it in "M1/N1, m2/N2" mode.
Where: "m" is vlanid, such as 853001.
3. Based on the speed limit of IP address segment, it is set in "M1/N1, m2/N2" mode.
Where: "m" is the IP address segment, and the format requirement is "x1.x2.x3.x4-y1.y2.y3.y4" for IPv4.
MultiCast VLAN
The multicast VLAN page is used to configure the public multicast VLAN value of broadband connection.
Password authentication is used to configure password and register with OLT.
PON device configuration
LOID certification
LOID configuration, used to configure LOID and password.
SN certification
PASSWORD authentication
The terminal device registers with OLT in SN mode.
Non-RMS options
set up
Click the setting button to set the device registration status to business distribution success.
Restore
Click the Restore button to restore the device registration status to the original status.
SN certification
Password authentication
The device registration mode selection takes effect immediately after selection
Platform portal push function switch
PPPoE automatic dialing enable
The "PPPoE automatic dialing enable" switch takes effect after restarting the device or plugging the optical fiber.
Protocol switch
Turn on/off specific business functions
Telnet enable
universal service
Basic configuration information
D1 interface information
This page displays the basic information of BUCPE equipment
Main domain name of management platform
Backup domain name of management platform
Reporting path (main)
Reporting path (standby)
Default reporting cycle (min)
Default task execution cycle (H)
Primary speed measurement path prefix
Alternate speed path prefix
Traceroute test domain name
Time service of management platform
Operator code
Equipment manufacturer code
UUID
Device Registration ID
D1 interface protocol version
This page obtains the information of the corresponding object according to the RPC method and path
route
method
__ISONET_EOF_LANGCN_CONF__
# Text file: login_t.gch (9061 bytes)
cat << '__ISONET_EOF_LOGIN_T_GCH__' > /userconfig/login_t.gch
<%
var login_err_msg = getenv("request/login_err_msg");
var is_login_blocked = getenv("request/is_login_blocked");
var login_monotonic_id = getenv("request/login_monotonic_id");
var language = getenv("request/language");
var langclass = getenv("request/langclass");
var styleback = getenv("request/styleback");
var handle_coucode = create_paralist();
get_inst(handle_coucode, "OBJ_PON_VERSION_SWITCH_ID", "");
var CurrentVersion = get_para(handle_coucode, "CountryCode");
destroy_paralist(handle_coucode);
var DISTRICT_OBJNAME = "OBJ_PROCFG_ID";
var DISTRICT_IDENTITY = "IGD";
var DISTRICT_HANDLE = create_paralist();
get_inst(DISTRICT_HANDLE, DISTRICT_OBJNAME, DISTRICT_IDENTITY);
var district_num = get_para(DISTRICT_HANDLE, "RegisterPageLangType");
destroy_paralist(DISTRICT_HANDLE);
var FP_HANDLE = create_paralist();
get_inst(FP_HANDLE, "OBJ_USER_REGISTER", "");
var result = get_para(FP_HANDLE, "Result");
var status = get_para(FP_HANDLE, "Status");
destroy_paralist(FP_HANDLE);
var WANType_HANDLE = create_paralist();
var INSTNUM = query_list("OBJ_CurUpType_ID", "IGD");
var WANType_IDENTITY = "";
if (INSTNUM == 1)
{
var identity = query_identity(0);
if (identity != "")
{
WANType_IDENTITY = identity + ".WDCommCfg";
}
else
{
WANType_IDENTITY = "IGD.WD1.WDCommCfg";
}
}
else
{
WANType_IDENTITY = "IGD.WD1.WDCommCfg";
}
get_inst(WANType_HANDLE, "OBJ_CurUpType_ID", WANType_IDENTITY);
var curtype = get_para(WANType_HANDLE, "WANAccessType");
destroy_paralist(WANType_HANDLE);
var head = "";
var head_html = "";
=head + head1;
=head_html;
var upload_login_flag = getenv("UPLOAD_LOGIN");
unsetenv("UPLOAD_LOGIN");
%>
IsoNet F460 Fiber Gateway
<%
%>
&?ErrRep;
IsoNet F460 Fiber Gateway
<%
if(get_config("hideCopyRight")!="Y")
{
%>
&?ZTE;
<%
}
%>
__ISONET_EOF_LOGIN_T_GCH__
# Text file: template.gch (16083 bytes)
cat << '__ISONET_EOF_TEMPLATE_GCH__' > /userconfig/template.gch
<%
IMPORT FILE "global.gch";
IMPORT FILE "auth/api.gch";
var sess_id = auth_sessid();
session_start(sess_id, 0);
var is_login = 0;
var is_banned = 0;
if( getenv("elogin") != 1 && auth_check(sess_id) == 0 )
{
var login_status = auth_get_status("login");
if (login_status == "logined")
{
is_login = 1;
}
else if (login_status == "banned")
{
auth_logout();
is_banned = 1;
}
}
if (is_login == 0)
{
setenv("request/is_banned", is_banned);
if (getenv("AlertDisable") == 1)
{
IMPORT FILE "timeout_t.gch";
}
else
{
IMPORT FILE "auth/timeout_ctl.gch";
}
return;
}
else
{
session_start(sess_id, -1);
}
auth_env_sync();
var head = "";
var head_html = "";
=head + head1;
=head_html;
%>
IsoNet F460 Fiber Gateway
<%
if(is_login != 0)
{
var Lang = request("_toplang");
var FP_HANDLE;
if (Lang is NOT NULL)
{
FP_HANDLE = create_paralist();
set_para(FP_HANDLE, "Timeout", request("Timeout"));
set_para(FP_HANDLE, "Language", Lang);
set_inst(FP_HANDLE, "OBJ_USERIF_ID", "");
if (Lang == "English")
{
set_language("langen.conf");
}
else
{
set_language("langcn.conf");
}
setenv("gw_lang", Lang);
}
}
var language = "";
var lang_img;
language = getenv("gw_lang");
if (language == "English")
{
set_language("langen.conf");
lang_img = "img/chinese_1.gif";
}
else
{
set_language("langcn.conf");
lang_img = "img/English_1.gif";
}
var menu011 = load_string("menu011");
var path001 = load_string("path001");
var path002 = load_string("path002");
var ZTE = load_string("ZTE");
var ErrRep = load_string("ErrRep");
var btn001 = load_string("btn001");
var btn002 = load_string("btn002");
var btn003 = load_string("btn003");
var btn004 = load_string("btn004");
var btn005 = load_string("btn005");
var btn006 = load_string("btn006");
var btn013 = load_string("btn013");
var subm_001 = load_string("subm_001");
var item_038 = load_string("item_038");
var item_014 = load_string("item_014");
var item_039 = load_string("item_039");
var item_060 = load_string("item_060");
var note_003 = load_string("note_003");
var cmret_001 = load_string("cmret_001");
var NotRep = load_string("NotRep");
var menu006 = load_string("menu006");
var csslang = load_string("csslang");
var nextpage = raw_request("nextpage");
if(nextpage == "" || nextpage IS NULL)
{
if ( "212" == getenv("CountryCode"))
{
nextpage = "status_dev_info_t_fj.gch";
}
else
{
nextpage = "status_dev_info_t.gch";
}
}
var helpTag = query_page_info(nextpage, "helpTag");
var helpInfo = load_string(helpTag);
IMPORT FILE "dmenu_func.gch";
if ( 0 == chkPageDisp(nextpage) )
{
is_login = 0;
}
else
{
session_set("nextpage", nextpage);
setenv("nextpage", nextpage);
}
if ( "Y" == get_config("TR069CertChain") )
{
set_menu_info("ssmTR069Basic", "helpTag", "chipv6_0061");
}
%>
">
__ISONET_EOF_TEMPLATE_GCH__
# Text file: frame.gch (2204 bytes)
cat << '__ISONET_EOF_FRAME_GCH__' > /userconfig/frame.gch
<%
var head = "";
var head_html = "";
=head + head1;
=head_html;
%>
<%=getenv("WEBTitle");%>
<%
IMPORT FILE "common_gch.gch";
if (getenv("g_systemBusyStatus") == "DBSaveTimeout")
{
create_form_start("fSubmit", "");
var n = getQryStrNum();
for (var i=0; i
__ISONET_EOF_FRAME_GCH__
# Text file: wlan_security.gch (2591 bytes)
cat << '__ISONET_EOF_WLAN_SECURITY_GCH__' > /userconfig/wlan_security.gch
<%
IMPORT FILE "common_gch.gch";
IMPORT FILE "wlan_wepkey_gch.gch";
IMPORT FILE "wlan_psk_gch.gch";
IMPORT FILE "wlan_config_gch.gch";
IMPORT FILE "wlan_driver_gch.gch";
var FP_HANDLE, FP_VIEWID;
var PARA[2] =
{
"WEPKey",
"WEPKey"
};
create_form_start("fSubmit", "");
createBasicHidden();
create_hidden_sep("IF_PSKTAG", "");
create_hidden_sep("IF_CONFIGTAG", "");
create_hidden_sep("IF_WEPKEYTAG", "");
create_hidden_sep("WEPKey", "");
for (var i = 0; i < 4; i++)
{
create_hidden_multiinstnewpara(FP_HANDLE,PARA, i, 1);
}
var FP_PSKTAG = request("IF_PSKTAG");
var FP_CONFIGTAG = request("IF_CONFIGTAG");
var FP_WEPKEYTAG = request("IF_WEPKEYTAG");
var FP_ACTION = request("IF_ACTION");
var FP_VIEWID = request("IF_VIEWID");
var FP_ERRORSTR = "SUCC";
var WLAN_OBJNAME = "OBJ_WLANCONFIG_ID";
var WLAN_INSTNUM = 0;
var flag = 0;
var SSID_Exist = 0;
var VIEWID_START = "IGD.LD1.WLAN1";
for(var i = 1;i < 5; i++)
{
var FP_HANDLE = create_paralist();
get_inst(FP_HANDLE, WLAN_OBJNAME, "IGD.LD1.WLAN"+i);
var LocalSetEnalbe = get_para(FP_HANDLE, "LocalSetEnable");
if(LocalSetEnalbe == 1)
{
create_hidden_sep("WLAN_SSID"+WLAN_INSTNUM, "IGD.LD1.WLAN"+i);
WLAN_INSTNUM = WLAN_INSTNUM + 1;
if (FP_VIEWID == "IGD.LD1.WLAN"+i)
{
flag = 1;
}
if(SSID_Exist == 0)
{
VIEWID_START = "IGD.LD1.WLAN"+i;
SSID_Exist = 1;
}
}
destroy_paralist(FP_HANDLE);
}
create_hidden_sep("WLAN_INSTNUM", WLAN_INSTNUM);
if (FP_VIEWID IS NULL)
{
FP_VIEWID = VIEWID_START;
}
if (flag == 0)
{
FP_PSKTAG = "N";
FP_CONFIGTAG = "N";
FP_WEPKEYTAG = "N";
FP_VIEWID = VIEWID_START;
}
create_hidden_sep("IF_VIEWID", FP_VIEWID);
if (FP_WEPKEYTAG == "Y" && FP_ACTION == "apply")
{
FP_HANDLE = create_paralist();
set_para(FP_HANDLE, "WEPKeyIndex", request("WEPKeyIndex"));
set_para(FP_HANDLE, "WEPKey", request("WEPKey"));
set_inst(FP_HANDLE, "OBJ_WLANCURRWEPKEY_ID", FP_VIEWID);
FP_ERRORSTR = getDisplayInstError(FP_ERRORSTR);
}
FP_ERRORSTR = psk_func(FP_ACTION, FP_PSKTAG, FP_VIEWID, FP_ERRORSTR);
FP_ERRORSTR = config_func(FP_ACTION, FP_CONFIGTAG, FP_VIEWID, FP_ERRORSTR);
FP_ERRORSTR = wepkey_func(FP_ACTION, FP_WEPKEYTAG, 0, FP_VIEWID, FP_ERRORSTR);
FP_ERRORSTR = wepkey_func(FP_ACTION, FP_WEPKEYTAG, 1, FP_VIEWID, FP_ERRORSTR);
FP_ERRORSTR = wepkey_func(FP_ACTION, FP_WEPKEYTAG, 2, FP_VIEWID, FP_ERRORSTR);
FP_ERRORSTR = wepkey_func(FP_ACTION, FP_WEPKEYTAG, 3, FP_VIEWID, FP_ERRORSTR);
var FP_BeaconTypeATTR = attr("InternetGatewayDevice.LANDevice.1.WLANConfiguration.1.BeaconType");
create_hidden_sep("IF_BeaconTypeATTR", FP_BeaconTypeATTR);
FP_VIEWID = VIEWID_START;
driver_func(FP_VIEWID, FP_ERRORSTR);
create_form_end();
%>
__ISONET_EOF_WLAN_SECURITY_GCH__
# Text file: status_dev_info_t.gch (6162 bytes)
cat << '__ISONET_EOF_STATUS_DEV_INFO_T_GCH__' > /userconfig/status_dev_info_t.gch
<%
var FP_HANDLE = create_paralist();
get_inst(FP_HANDLE, "OBJ_DEVINFO_ID", "");
var ModelName = get_para(FP_HANDLE,"ModelName");
var SerialNumber = get_para(FP_HANDLE,"SerialNumber");
var HardwareVer = get_para(FP_HANDLE,"HardwareVer");
var SoftwareVer = get_para(FP_HANDLE,"SoftwareVer");
var BootVer = get_para(FP_HANDLE,"BootVer");
var ManuFacturerOui = get_para(FP_HANDLE,"ManuFacturerOui");
var DeviceID = "";
var DeviceType = get_para(FP_HANDLE,"DeviceType");
var AccessType = get_para(FP_HANDLE,"AccessType");
if(ManuFacturerOui!="" && SerialNumber=="")
{
DeviceID = ManuFacturerOui;
}
else if(ManuFacturerOui!="" && SerialNumber!="")
{
DeviceID = ManuFacturerOui+"-"+SerialNumber;
}
else
{
}
var SoftwareVerExtent = get_para(FP_HANDLE,"SoftwareVerExtent");
destroy_paralist(FP_HANDLE);
%>
<%
if(getenv("DevInfoEnable") == "1")
{
%>
&?devinfo_001;
<%=DeviceType;%>
&?devinfo_002;
<%=AccessType;%>
<%
}
%>
&?dein001;
<%=encodeHTML(ModelName);%>
&?dein002;
<%=encodeHTML(DeviceID);%>
&?cmn53;
<%=encodeHTML(SoftwareVerExtent);%>
&?dein003;
<%=encodeHTML(HardwareVer);%>
&?dein004;
<%=encodeHTML(SoftwareVer);%>
&?dein005;
<%=encodeHTML(BootVer);%>
📶PENGATURAN CEPAT WI-FI
Untuk mempermudah pelanggan mengganti sandi atau nama Wi-Fi tanpa salah menu, silakan klik tombol di bawah ini:
💡 Petunjuk Mudah:
1. Klik tombol Ganti Sandi Wi-Fi di atas.
2. Ketikkan sandi baru Anda (min. 8 karakter) pada kolom WPA Passphrase.
3. Klik Submit. Sambungkan kembali HP/Laptop Anda dengan sandi baru.
__ISONET_EOF_STATUS_DEV_INFO_T_GCH__
# Text file: sec_macfilter_conf_t.gch (11851 bytes)
cat << '__ISONET_EOF_SEC_MACFILTER_CONF_T_GCH__' > /userconfig/sec_macfilter_conf_t.gch
<%
IMPORT FILE "all_mac_gch.gch";
IMPORT FILE "sec_macfilter_conf_js.gch";
/* 1. Query DHCP Leases for HostName, MAC, IP */
var DHCP_OBJ = "OBJ_DHCPHOSTINFO_ID";
var DHCP_NUM = query_list(DHCP_OBJ, "IGD");
/* 2. Query Live ARP Table */
var ARP_NUM = 0;
var h_arp = create_paralist();
get_inst(h_arp, "OBJ_GETARPNUM_ID", "");
ARP_NUM = integer(get_para(h_arp, "ARP_NUM"));
destroy_paralist(h_arp);
var ARP_INST_OBJ = "OBJ_GETARPINST_ID";
var h_arplist;
if (ARP_NUM > 0)
{
h_arplist = create_paralist();
set_para(h_arplist, "DispNum", ARP_NUM);
set_para(h_arplist, "DispType", 0);
get_inst(h_arplist, ARP_INST_OBJ, "");
}
%>
🛡️ Status & Kebijakan Filter MAC (Access Control)ZTE F460 IsoNet Security
Aktifkan Filter MAC:
Mode Penyaringan:
📱 Daftar Perangkat & HP Terhubung (Live Connected)
Berikut adalah seluruh HP, laptop, dan perangkat yang saat ini tersambung ke jaringan router. Klik [⛔ Blokir] untuk memutus akses internet perangkat tersebut seketika.
